Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Post Reply
 
LinkBack Thread Tools Display Modes
Old 02-23-2018, 08:38 PM   #1
Registered User
 
Join Date: Feb 2018
Location: Los Angeles
Posts: 5
Unhappy Anyone familiar with these fault codes?

Just picked up my 986 today, didn't drive it too hard but did put some miles on it. The check engine light came on and I ran the fault codes and these are what I got (the car drives and idles fine)

P1319 Misfire, Emission Related, Signal Implausible Cyl. 1-6
P1316 Misfire, Emission Related, Signal Implausible Cyl. 1-6
P1317 Misfire, Emission Related, Signal Implausible Cyl. 1-6
P1318 Misfire, Emission Related, Signal Implausible Cyl. 1-6
P0130 O2 Circuit (Bank 1, Sensor 1)
P1313 Misfire, Emission Related, Signal Implausible Cyl. 1-6
P1314 Misfire, Emission Related, Signal Implausible Cyl. 1-6
P1315 Misfire, Emission Related, Signal Implausible Cyl. 1-6
P1124 O2S Sensing Range 1 Cyl. 1-3
P1126 O2S Sensing Range 1 Cyl. 1-3
P0150 O2 Circuit (Bank 2, Sensor 1)

I think I'm going to start with fresh spark plugs but any input is appreciated!

jhnstn_tylr is offline   Reply With Quote
Old 02-23-2018, 10:19 PM   #2
Registered User
 
The Radium King's Avatar
 
Join Date: Apr 2010
Location: Canada
Posts: 3,121
new car to you? clear them all and see if they come back. no idea what the po may have done - get a clean slate for diagnosis.
The Radium King is offline   Reply With Quote
Old 02-24-2018, 05:31 AM   #3
Beginner
 
Jamesp's Avatar
 
Join Date: Mar 2013
Location: Houston
Posts: 1,659
Garage
More information would help. Year, transmission and engine size.
__________________
2003 S manual
Jamesp is offline   Reply With Quote
Old 02-24-2018, 09:34 AM   #4
Registered User
 
Join Date: Feb 2018
Location: Los Angeles
Posts: 5
1999 manual 2.5L, let me know if you need any more info, thanks
jhnstn_tylr is offline   Reply With Quote
Old 02-24-2018, 09:35 AM   #5
Registered User
 
Join Date: Feb 2018
Location: Los Angeles
Posts: 5
@ The Radium King: Will do, thanks
jhnstn_tylr is offline   Reply With Quote
Old 02-24-2018, 12:29 PM   #6
Registered User
 
Join Date: Apr 2007
Location: Bay Area
Posts: 524
Quote:
Originally Posted by jhnstn_tylr View Post
1999 manual 2.5L, let me know if you need any more info, thanks
Since you just bought this car I’m going to assume the previous owner cleared these codes before handing the car over to you. I’m also going to assume the engine idle is not stable.

One of the first things I would Do is clean the throttle body and idle control valve and clean the MAF. While there check and make sure your vacuum lines are connected and see if any noticeable vacuum leaks.
The next thing I would check is see if your AOS should be replaced. Do a search on AOS problems.
__________________
2008 Boxster S PDE2
02 Boxster S Blk on Blk(Stock for the Wife)
88 turbo S (My Toy) slightly modified
cas951 is offline   Reply With Quote
Old 02-24-2018, 05:02 PM   #7
1997 Tip, 2018 Macan
 
rexcramer's Avatar
 
Join Date: Aug 2015
Location: Upland, CA
Posts: 1,338
Garage
I had 1124 and 1126 and ended up with a vacuum leak that I needed to have my indy hook a smoke generator to find.
rexcramer is offline   Reply With Quote
Old 02-24-2018, 05:15 PM   #8
Registered User
 
Join Date: Feb 2018
Location: Los Angeles
Posts: 5
Update: First, thanks for all the advice everyone. I took it to my shop and had the guy do a full on check all over the vehicle. As I expected, spark plugs need replacing along with the boots and seals. On top of that my cam covers are leaking, my oil separator hose is leaking (causing the air leak), and my oil pan is leaking. Other than that the motor mounts will probably need replacing within the next 10k. A little worse than I hoped for but a little better than I anticipated. I should be able to do the oil pan and spark plugs but I'll take it in for the cam covers and oil separator hose. All in all Im hoping itll be less than 2k but well see.

jhnstn_tylr is offline   Reply With Quote
Post Reply

Tags
codes , fault , misfire , o2s


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 08:27 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page