|
A set of security torx bits are a cheap investment. You'll need the security style to Remove and clean your MAF sensor. Can think of other spots where torx are used but the MAF is the only one that I can think of that needs the security style. The bits are cheap...~$5 for a set.
The car uses all the typical tools of any other cars for routine maintenance. Good sets of 1/4" and 3/8" metric sockets are needed (deep and shallow) and drives.
Also bought a threaded stud to thread into the wheel hub during wheel R/R. Makes it so much easier to remount a wheel.
|
Threaded Mode
