Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Post Reply
 
LinkBack Thread Tools Display Modes
Old 08-02-2017, 10:49 PM   #1
Registered User
 
Join Date: Nov 2016
Location: London
Posts: 234
Quote:
Originally Posted by ymkmkrz View Post
Brave souls. If it does fail and trashes the engine it will be hard to find a replacement. From what I have heard, someone or probably several someones, has been buying up every available engine. porsche no longer offers a core allowance either. For a relatively cheap maintenance item, I just don't understand the thought process and I had three with no failures prior to replacing.


Sent from my iPhone using Tapatalk
Nothing brave about it. Take care of your car and it will take care of you. Regular oil changes and proper maintenance will keep it singing for years, or you can treat it like a Hyundai beater and watch it fail. My car has 103000 miles on it and done 10000 this year, it gets driven hard and gears don't get changed most of the time until after 4000 rpm. I use it like Porsche intended it to be used and love doing so, i believe that if you get out and actually drive a car it does it the world of good as things stay lubricated and spinning. As Magnus says "get out and drive" and i reckon that the happiest cars are getting exactly that.

As for the scaremongering that seems to happen on this forum about this subject it really needs to calm down as people are more than informed about their choices on this and don't need it ramming down their throat in an almost religious zealot fashion.
That986 is offline   Reply With Quote
Old 08-03-2017, 07:48 AM   #2
Registered User
 
Join Date: May 2014
Location: S.California
Posts: 2,029
The comments below may only apply to an M96 with exactly the same IMS-related tolerances as the hyundai beater cited.Your engine may be different - better or worse.That is the essence of the M96 IMS issue - multiple mechanical variations leading to unpredictable failure. Postmortems can give an explanation of some of the proximate causes of failure.Driving style is cited but only in a few of the contributory factors(e.g. acidity in lubricant).
The IMS research findings on this Forum are that M96 engines vary in critical dimensions and tolerances. The more adverse tolerances your engine has, the sooner the bearing will fail.
Chest-beating comments like 'drive it like you stole it' do not frighten out-of-round IMS tube measurements into obedient concentricity.
The recommendation below may hasten IMSB failure(and other weak components) but according to the recommendation below .the car will die happy. We may be muddling Mechanical Engineering and collective Forum wisdom with Anthropology ?
First, do no harm.
Second, find a competent,honest Indie.
It is all in Search.
Yemv
Quote:
Originally Posted by That986 View Post
Nothing brave about it. Take care of your car and it will take care of you. Regular oil changes and proper maintenance will keep it singing for years, or you can treat it like a Hyundai beater and watch it fail. My car has 103000 miles on it and done 10000 this year, it gets driven hard and gears don't get changed most of the time until after 4000 rpm. I use it like Porsche intended it to be used and love doing so, i believe that if you get out and actually drive a car it does it the world of good as things stay lubricated and spinning. As Magnus says "get out and drive" and i reckon that the happiest cars are getting exactly that.

As for the scaremongering that seems to happen on this forum about this subject it really needs to calm down as people are more than informed about their choices on this and don't need it ramming down their throat in an almost religious zealot fashion.

Last edited by Gelbster; 08-03-2017 at 07:53 AM.
Gelbster is offline   Reply With Quote
Old 08-03-2017, 09:39 AM   #3
Registered User
 
Join Date: Nov 2016
Location: London
Posts: 234
Blah, blah, blah, about what I expected. I was wondering when the united ims replacement front would show up.

Can we actually get back to the thread in hand and pass on the "omg you better replace it now" comments?


Quote:
Originally Posted by Gelbster View Post
The comments below may only apply to an M96 with exactly the same IMS-related tolerances as the hyundai beater cited.Your engine may be different - better or worse.That is the essence of the M96 IMS issue - multiple mechanical variations leading to unpredictable failure. Postmortems can give an explanation of some of the proximate causes of failure.Driving style is cited but only in a few of the contributory factors(e.g. acidity in lubricant).
The IMS research findings on this Forum are that M96 engines vary in critical dimensions and tolerances. The more adverse tolerances your engine has, the sooner the bearing will fail.
Chest-beating comments like 'drive it like you stole it' do not frighten out-of-round IMS tube measurements into obedient concentricity.
The recommendation below may hasten IMSB failure(and other weak components) but according to the recommendation below .the car will die happy. We may be muddling Mechanical Engineering and collective Forum wisdom with Anthropology ?
First, do no harm.
Second, find a competent,honest Indie.
It is all in Search.
Yemv
That986 is offline   Reply With Quote
Old 08-03-2017, 11:21 AM   #4
Registered User
 
Join Date: May 2014
Location: S.California
Posts: 2,029
Quote:
Originally Posted by That986 View Post
Blah, blah, blah, about what I expected. I was wondering when the united ims replacement front would show up.

Can we actually get back to the thread in hand and pass on the "omg you better replace it now" comments?
If you have a technical comment to add to the collective wisdom at Rennlist or this Forum -we're all eyeballs.Did you understand Mike's comment?
Replacing the IMSB proactively may be futile - see below.
One unique example - I personally did a complete rebuild on an M96 that had had the original (85kmiles) 'still serviceable' single row IMSB.The P.O. replaced it but failed to address a more serious issue. The upgrade hybrid ceramic replacement was irrelevant to the outcome. FOM damaged #5 within less than 500 miles of the replacement IMSB being fitted..So the engine is on it's 3rd IMSB even though no part of the IMS system was ever shown to be defective.
Sometimes the cure is worse than....
Very difficult to make a useful generalization on the IMS problem other than the tolerance issues.Unless you can correlate the symptoms,diagnosis and outcomes you encourage people to gamble.Mileage is but one factor, driving style another but if you read Rennlist and this Forum carefully ,it is obvious there are many other issues.It is not random.And IMSB failure may not be the caused by the bearing .
First, do no harm.Particularly to others.

Last edited by Gelbster; 08-03-2017 at 11:30 AM.
Gelbster is offline   Reply With Quote
Old 08-03-2017, 11:30 AM   #5
Registered User
 
Join Date: Nov 2016
Location: London
Posts: 234
I've nothing technical to add because there are a lot more people out there putting their spin on what needs doing and when without conclusive reason as to why.

I do know this much, it gets real boring when every other thread on here turns into another ims thread.

Quote:
Originally Posted by Gelbster View Post
If you have a technical comment to add to the collective wisdom at Rennlist or this Forum -we're all eyeballs.Did you understand Mike's comment?
Replacing the IMSB proactively may be futile - see below.
One unique example - I personally did a complete rebuild on an M96 that had had the original (85kmiles) 'still serviceable' single row IMSB.The P.O. replaced it but failed to address a more serious issue. The upgrade hybrid ceramic replacement was irrelevant to the outcome. FOM damaged #5 within less than 500 miles of the replacement IMSB being fitted..So the engine is on it's 3rd IMSB even though no part of the IMS system was ever shown to be defective.
Sometimes the cure is worse than....
Very difficult to make a useful generalization on the IMS problem other than the tolerance issues.Unless you can correlate the symptoms,diagnosis and outcomes you encourage people to gamble.Mileage is but one factor, driving style another but if you read Rennlist and this Forum carefully ,it is obvious there are many other issues.It is not random.And IMSB failure may not be the caused by the bearinig .
That986 is offline   Reply With Quote
Old 08-03-2017, 01:28 PM   #6
Registered User
 
911monty's Avatar
 
Join Date: Oct 2014
Location: California Central Coast
Posts: 1,476
Garage
Quote:
Originally Posted by That986 View Post
I've nothing technical to add because there are a lot more people out there putting their spin on what needs doing and when without conclusive reason as to why.

I do know this much, it gets real boring when every other thread on here turns into another ims thread.
Boring???? At this point this topic from this forum has reduced any 986 that has not had an IMSB replaced just about worthless and next to impossible to sell. Next fun topic, How about, how many have replaced your IMSB only to have your car totaled from a thunderstorm?

Last edited by 911monty; 08-03-2017 at 01:35 PM.
911monty is offline   Reply With Quote
Old 08-03-2017, 01:46 PM   #7
Registered User
 
Join Date: Nov 2016
Location: London
Posts: 234
Quote:
Originally Posted by 911monty View Post
Boring???? At this point this topic from this forum has reduced any 986 that has not had an IMSB replaced just about worthless and next to impossible to sell. Next fun topic, How about, how many have replaced your IMSB only to have your car totaled from a thunderstorm?
Now that sounds like fun!!!

Can we then have a who totalled their Boxster while making out and driving at the same time thread?
That986 is offline   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 07:19 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page