Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Post Reply
 
LinkBack Thread Tools Display Modes
Old 04-02-2017, 05:39 AM   #1
Project Addicted
 
jcslocum's Avatar
 
Join Date: Aug 2015
Location: Eastern Shore, MD
Posts: 623
No tach movement usually points to the CPS (crank pos sensor). You don't need to get under the hood to replace this or test it. It's kinda behind the right rear wheel, in a crack between the engine and the trans. It's held in by 1 Allen bolt and has a 12" lead and a plug on the end.





Look for the bosch part number because there are less exp options out there than the Porsche part and they are exactly the same.
__________________
______
Jon
1966 912, 1976 911
1986 944, 2000 Boxster
jcslocum is offline   Reply With Quote
Old 04-02-2017, 06:40 AM   #2
Motorist & Coffee Drinker
 
78F350's Avatar
 
Join Date: Jul 2014
Location: Oklahoma
Posts: 3,940
Garage
Note: Before responding, check the original post. It seems he is reposting for new and fresh solutions.

Sweezy, getting the top open is not hard if you follow the directions that you can easily find by searching. Here's one from outside the forum, with pictures. My convertible roof is stuck and not working, can I close/open it manually? ...or as bwdz said, it's in the owners manual.
For getting the car running, you may need someone else locally to get a look (associate or local enthusiast willing to volunteer an hour or two). If you have been at it this long and still haven't figured out how to open the top, you are not ready to fix a non-running engine. You can easily make things worse and more expensive to fix.
__________________
I am not an attorney, mechanic, or member of the clergy. Following any advice given in my posts is done at your own peril.
78F350 is offline   Reply With Quote
Old 04-02-2017, 03:51 PM   #3
Registered User
 
Join Date: Feb 2017
Location: Virginia
Posts: 22
Quote:
Originally Posted by jcslocum View Post
No tach movement usually points to the CPS (crank pos sensor). You don't need to get under the hood to replace this or test it. It's kinda behind the right rear wheel, in a crack between the engine and the trans. It's held in by 1 Allen bolt and has a 12" lead and a plug on the end.





Look for the bosch part number because there are less exp options out there than the Porsche part and they are exactly the same.
Ive already replaced it that didnt work
Sweezy804 is offline   Reply With Quote
Post Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 01:11 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page