Go Back   986 Forum - for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Reply
 
LinkBack Thread Tools Display Modes
Old 11-29-2016, 03:48 PM   #1
Registered User
 
Join Date: Nov 2016
Location: DC
Posts: 1
Clutch kits for 986 Boxster S with LS Swap

Hi, I'm using the Kennedy Engineering Products (KEP) transmission adaptor to mate my LS3 to a G86.20 transaxle from a 01 Boxster S. Renegade Hybrids also uses this KEP kit that they offer to Porsche owners.

KEP sells an 'enlarged'/upgraded clutch kit for this combination, and I'm trying to figure out what else might fit. I've heard rumors that a 996 Sachs clutch kit will work in this configuration. (A stock Boxster S clutch will also work, but won't hold the torque and will be rough.)

In looking clutch kits made to work with the G86.20, my favorite one I've seen so far is the Spec Stage 3+ SP903F that holds 671 lb/ft of torque. It's a sprung disk, which is what I need since the adapter comes with a single mass flywheel.

I'd like to know if there are other options out there that will fit, particularly ones that have larger surface area, high torque handling (600+ lb/ft) and still have a sprung center.

Thanks for any suggestions!
phy6 is offline   Reply With Quote
Reply

Tags
clutch , g8620 , kep , lsx , swap


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 12:26 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page