Instrument Cluster Woes

[huntern321]

Hello, everyone.

My speedometer, Tachometer, and all of the lower info LCDs are not functioning. They can be manually triggered with Durametrics but do not operate with the car. The speedo and tach stay at 0 while the LCDs are backlit and blank. The temp/fuel gauges and warning lights are fine, however. Any and all info would be greatly appreciated. 1998 Boxster. Also I checked all fuses and have tried to find if a relay is the culprit, but no luck.

Thanks you!

[jcslocum]

I had a dead-ish dash and had to replace it. Did lots of fussing to get it to work and none of it helped. I got a used one from Woody on this list.

[huntern321]

Originally Posted by jcslocum

I had a dead-ish dash and had to replace it. Did lots of fussing to get it to work and none of it helped. I got a used one from Woody on this list.

I just find it curious that I would have a bad instrument cluster if I can trigger all the dials through OBD II.

[KevinH1990]

This may be a bit of a long shot, but I suggest that you search on the terms "ignition switch" and "cluster" to see if anyone else has had the same problem due to a bad ignition switch. A failed switch can cause some seemingly unrelated problems.

Another possible check is to make sure all of the connectors are seated properly.

[huntern321]

This person seems to have been experiencing my exact same issue with their 996:

Need Help, Instrument Cluster Does Not Work Completly Anymore - 996 Series (Carrera, Carrera 4, Carrera 4S, Targa) - RennTech.org Community