Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Post Reply
 
LinkBack Thread Tools Display Modes
Old 02-24-2015, 09:57 AM   #1
Registered User
 
Join Date: Oct 2014
Location: Oshawa
Posts: 96
Another Rim size question

I cannot find the required information. I have a 97 base Boxster. (17"Rims). I have been offered some 17" rims from a 2001 Boxster S. Curious if anyone knows if the wheels are standard same size. Don't want to buy spacers etc. Just looking to swap rims out.
__________________
1997 Boxster! (Tiptronic)
brjak is offline   Reply With Quote
Old 02-24-2015, 10:02 AM   #2
Registered User
 
steved0x's Avatar
 
Join Date: Dec 2012
Location: FL
Posts: 4,144
Should be totally interchangeable, 17" wheels from any 986 Boxster should be a good fit with no spacers required.

The fronts should be 7X17 ET 55mm
Backs should be 8.5X17 ET 48mm or 50mm

Steve
steved0x is offline   Reply With Quote
Old 02-24-2015, 10:04 AM   #3
Registered User
 
Join Date: Oct 2014
Location: Oshawa
Posts: 96
Its actually from an 07 Boxster S.
FRONT 6.5 JX 17H2 OFFSET 55MM
REAR 8J X 17H2 OFFSET 40MM

These are the measurements of the new rims. I see they are slightly different, Will they still fit?
__________________
1997 Boxster! (Tiptronic)

Last edited by brjak; 02-24-2015 at 10:17 AM.
brjak is offline   Reply With Quote
Old 02-24-2015, 10:58 AM   #4
Registered User
 
ルーカス's Avatar
 
Join Date: May 2014
Location: Ottawa, ON
Posts: 121
Still would fit. If you're lowered worst case scenario you have to run a 5-10mm spacer to clear your strut!
ルーカス is offline   Reply With Quote
Old 02-24-2015, 02:23 PM   #5
Registered User
 
jacabean's Avatar
 
Join Date: Nov 2009
Location: mass
Posts: 731
those should fit . the rear is only an 8"
jacabean is offline   Reply With Quote
Old 02-24-2015, 05:18 PM   #6
Need For Speed
 
KRAM36's Avatar
 
Join Date: Feb 2013
Location: Funville
Posts: 2,114
Garage
Man the width of those wheels are small. Is it the 97 model that you can't go with larger wheels on due to structural integrity?
__________________
2003 Boxster S
| 987 Air Box | K&N Air Filter | 76mm Intake Pipe| 996 76mm TB | 997 Distribution T | Secondary Cat Delete Pipes | Borla Muffler | NHP 200 Cell Exhaust Headers |
KRAM36 is offline   Reply With Quote
Old 02-24-2015, 07:08 PM   #7
Registered User
 
Join Date: Oct 2014
Location: Oshawa
Posts: 96
The 97 cannot have anything larger than 17".
__________________
1997 Boxster! (Tiptronic)
brjak is offline   Reply With Quote
Old 02-24-2015, 10:42 PM   #8
Registered User
 
Join Date: Feb 2013
Location: the Netherlands
Posts: 65
18 inch definitely fits without spacers

The size is 225/40/18 and 265/35/18

My Porsche specialist explained not to go for 19 because of the body (wishbone). But 18 definitely is safe!!!!

ducati11 is offline   Reply With Quote
Old 02-27-2015, 10:10 AM   #9
Registered User
 
Join Date: Oct 2014
Location: Oshawa
Posts: 96
I know this question maybe basic to some. but for me I can't figure it out. I figure the answer is yes. but just want to make sure.

I am buying some porsche rims.

I have stock turbo twists 17" I am buying stock boxster S rims 17"

sizes:

FRONT 6.5 JX 17H2 OFFSET 55MM
REAR 8J X 17H2 OFFSET 40MM

Will my current almost tires fit these rims? 205/50R17 and 255/40R17.

thx
__________________
1997 Boxster! (Tiptronic)
brjak is offline   Reply With Quote
Old 02-27-2015, 12:00 PM   #10
Need For Speed
 
KRAM36's Avatar
 
Join Date: Feb 2013
Location: Funville
Posts: 2,114
Garage
Quote:
Originally Posted by brjak View Post
I know this question maybe basic to some. but for me I can't figure it out. I figure the answer is yes. but just want to make sure.

I am buying some porsche rims.

I have stock turbo twists 17" I am buying stock boxster S rims 17"

sizes:

FRONT 6.5 JX 17H2 OFFSET 55MM
REAR 8J X 17H2 OFFSET 40MM

Will my current almost tires fit these rims? 205/50R17 and 255/40R17.

thx
Front tires are a good fit. The rear tires are pushing beyond the recommended size for an 8" width wheel.
__________________
2003 Boxster S
| 987 Air Box | K&N Air Filter | 76mm Intake Pipe| 996 76mm TB | 997 Distribution T | Secondary Cat Delete Pipes | Borla Muffler | NHP 200 Cell Exhaust Headers |
KRAM36 is offline   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 04:45 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page