Quote:
Originally Posted by itsnotanova
Tom, How hard is it to get to the front engine cover with those fixed seats?
|
With sliders about the same as with the stock seats, maybe a touch less room but doable.
With seats bolted to the floor (like my driver seat) the seat has to come out, unless it is way forward and even then probably. Mine is all the way back.
My passenger seat is Recaro Profi (not xl version like driver side) on sliders. Last time I needed to get to the panel behind the seats (oil temp and pressure gauge wiring) I took out the driver side (4 bolts and unclip the seat belt wire), and was able to just slide the pax seat forward.
Even when I had my stock seats (when I did UDP and WP) I took out the pax seat so I could kneel and have more to work.
Steve
Hybrid Mode
