Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Post Reply
 
LinkBack Thread Tools Display Modes
Old 03-22-2019, 08:05 PM   #4821
Registered User
 
Join Date: Aug 2011
Location: Rochester, NY
Posts: 97
Quote:
Originally Posted by PaulE View Post
Please tell me about that steering wheel - where to buy, it looks great!
I bought it on ebay... search: T96 Porsche

Also if you go on the company's website they also have a swap program which is "slightly" cheaper where they sell you the original round version of the steering wheel but it is thicker. The down side is they charge you a core and you need to send them your old steering wheel after you removed it to get the core deposit refunded.

I wanted the flat bottom as I find I drive bowl legged and wanted a bit more leg room. Hopefully I will install it tomorrow. It's snowing again here tonight so no test drive.

m332is is offline   Reply With Quote
Old 03-23-2019, 08:13 AM   #4822
Registered User
 
Dave80GTSi's Avatar
 
Join Date: Sep 2016
Location: Central Ohio
Posts: 404
Quote:
Originally Posted by PaulE View Post
Please tell me about that steering wheel - where to buy, it looks great!
And, you can get this wheel with colored stitching, so to match your car's color scheme.

Highly recommended!






__________________
2000 Ocean Blue Boxster S
1980 Ferrari 308 GTSi
2019 Alfa Romeo Giulia Ti Sport AWD
Dave80GTSi is online now   Reply With Quote
Old 03-23-2019, 09:36 AM   #4823
Registered User
 
morgal48's Avatar
 
Join Date: Jan 2014
Location: Texas
Posts: 221
Had a set of Michelin Pilot Sport A/S 3+ installed. Finished installing Joe Toth's rear spoiler.
__________________
2000 Boxster S
2010 Volvo XC60
2011 GMC Denali HD 6.6L (sold)
2008 Cayenne S (sold)
1989 Targa (sold)
morgal48 is offline   Reply With Quote
Old 03-23-2019, 02:33 PM   #4824
Registered User
 
Join Date: Jan 2014
Location: New Jersey
Posts: 1,631
Those look great. If I do it I will keep a round steering wheel and look into getting one recovered and made thicker with a red or yellow strip at 12 o'clock. I remember Chuck W sent his to a place called CarsDream in Poland.

Quote:
Originally Posted by m332is View Post
I bought it on ebay... search: T96 Porsche

Also if you go on the company's website they also have a swap program which is "slightly" cheaper where they sell you the original round version of the steering wheel but it is thicker. The down side is they charge you a core and you need to send them your old steering wheel after you removed it to get the core deposit refunded.

I wanted the flat bottom as I find I drive bowl legged and wanted a bit more leg room. Hopefully I will install it tomorrow. It's snowing again here tonight so no test drive.

Quote:
Originally Posted by Dave80GTSi View Post
And, you can get this wheel with colored stitching, so to match your car's color scheme.

Highly recommended!






PaulE is offline   Reply With Quote
Old 03-23-2019, 03:25 PM   #4825
Registered User
 
Bald Eagle's Avatar
 
Join Date: Jul 2014
Location: Valparaiso, IN
Posts: 184
Got it out of storage today. Had the battery at home on a maintainer so had to install it, took the cover off, got in, put the key in the ignition, took a deep breath and turned the key... we have ignition!!! we have a running engine for the first time since the first Saturday in November. Took it to Discount Tire and returned tire pressure to 32F / 34 R, put the top down on the first sunny, warmish day (about 50 which is warmish for this time of year) with the windows up and the heater on remembering why I love this car.
Larry (the Bald Eagle)
Bald Eagle is offline   Reply With Quote
Old 03-23-2019, 03:54 PM   #4826
Registered User
 
Join Date: Jan 2014
Location: New Jersey
Posts: 1,631
Well the battery in my car is now 10 years old. It is an Interstate H7 85 month warranty battery. Whenever my car is in the garage it is connected to a CTEK 3300 maintainer. As my car was in the shop for over 8 months due to my engine rebuild saga, and I figured that I was going to need a new battery, but the shop said no, it was still good. Got my car home 2 weeks ago and the CTEK maintainer had the green light on and the yellow light blinking fast, couldn't get just the solid green light. This is with the cigarette lighter attachment for the CTEK. The CTEK manual says when there is a solid green light and blinking orange light, it is either due to a bad connection or the battery can no longer be de-sulfated. The car starts right up, the batttery cranks the starter without any hesitation., but since the battery is now 10 years old I figured it must be the latter, that it now has sulfate crystals too big to de-sulfate. Before going out to buy a new battery, I thought I would try attaching the CTEK wires that bolt directly to the battery terminals to rule out a bad connection. To my surprise I've had a solid green light without a blinking orange light for a couple of days now. So I am putting off a new battery for a little longer, but I have my eye on the Bosch AGM H7 battery at Pep Boys as it looks like the best deal around right now at $150.
PaulE is offline   Reply With Quote
Old 03-23-2019, 05:08 PM   #4827
Registered User
 
Join Date: Mar 2014
Location: So Cal
Posts: 299
Garage
Quote:
Originally Posted by morgal48 View Post
Had a set of Michelin Pilot Sport A/S 3+ installed. Finished installing Joe Toth's rear spoiler.
Good luck making them last past 15k miles... On the 986 I got only 15k, on the Audi B7 less than 23k. Conti is a better daily driver tire...
mgfranz is offline   Reply With Quote
Old 03-23-2019, 05:14 PM   #4828
Registered User
 
Join Date: Mar 2014
Location: So Cal
Posts: 299
Garage
Changed plugs and the oil pressure spring, don't let them other DIY fool you, I lost about a half quart of oil changing the spring and valve...
But the plugs don't look bad for who knows how many miles. Worn out, but clean.
mgfranz is offline   Reply With Quote
Old 03-23-2019, 06:57 PM   #4829
1997 Tip, 2018 Macan
 
rexcramer's Avatar
 
Join Date: Aug 2015
Location: Upland, CA
Posts: 1,338
Garage
I replaced the original coolant cap ages ago. Still had condensation issues on the bottom of the trunk lid. Finally got around to replacing the two o-rings on the bleeder valve. Condensation issues are gone. Thanks Pelican Parts for the the supplies. 999-707-370-40 (large) $3.00 and 999-707-371-40 (small) $1.50.
rexcramer is offline   Reply With Quote
Old 03-23-2019, 07:51 PM   #4830
Registered User
 
kirkandorules's Avatar
 
Join Date: Jun 2017
Location: Madison, WI
Posts: 114
Beautiful day today, about 55 degrees and sunny. Washed the car with Optimum No-Rinse - this stuff is pretty rad, you can wash your car in the garage! Then went for my extensive drive of the year on some nice back roads.

So now I have a clean car except for mud splatters, which looks kinda cool.
__________________
'99 986 Ocean Blue Metallic
'87 924S, winter beater
'17 VW Golf Sportwagen, for when I need extra seats
kirkandorules is offline   Reply With Quote
Old 03-24-2019, 03:56 AM   #4831
MYRX
 
Join Date: Dec 2018
Location: Winterville, GA
Posts: 44
Changed the oil, then installed the LN adaptor that allows use of a spin-on oil filter. Next I applied the Leatherique rejuvenator oil and the prestine cleaner to my leather seats. Wow, great stuff. Finally I changed the cabin filter and changed the engine air filter.

So she is just about ready for Spring. It's going to be a beautiful day in the Athens, GA area today. I'll take her for a ride on some back roads
MYRX is offline   Reply With Quote
Old 03-24-2019, 10:31 PM   #4832
Registered User
 
Join Date: Sep 2017
Location: SF Bay Area
Posts: 112
Garage
New car again

Broke the 100k mile mark, looking forward to the next.
Attached Images
 
Steelepuls is offline   Reply With Quote
Old 03-25-2019, 05:51 AM   #4833
Registered User
 
Join Date: Feb 2016
Location: SE USA
Posts: 322
Cat Delete Pipes

Finally dropped the second set of cats. (Thanks for the pipes NewArt.) This was actually one of the easiest modifications I've done. Shot a little PB Blaster on the old bolts and they came off no problem. The fit of the new pipes was almost a drop in replacement. Now I'm just burning off the smell of the exhaust wrap and high temp paint.
Jgkram is offline   Reply With Quote
Old 03-25-2019, 06:42 AM   #4834
Registered User
 
Dave80GTSi's Avatar
 
Join Date: Sep 2016
Location: Central Ohio
Posts: 404
Quote:
Originally Posted by Jgkram View Post
Finally dropped the second set of cats. (Thanks for the pipes NewArt.) This was actually one of the easiest modifications I've done. Shot a little PB Blaster on the old bolts and they came off no problem. The fit of the new pipes was almost a drop in replacement. Now I'm just burning off the smell of the exhaust wrap and high temp paint.
Do you know of the brand of your replacement pipes?

Any notable performance changes observed yet?

DM
__________________
2000 Ocean Blue Boxster S
1980 Ferrari 308 GTSi
2019 Alfa Romeo Giulia Ti Sport AWD
Dave80GTSi is online now   Reply With Quote
Old 03-25-2019, 06:48 AM   #4835
01101
 
Join Date: Jul 2015
Location: CT
Posts: 587
Did some cleaning! Still need to paint the calipers. I swear I'll do it this year.

alm001 is offline   Reply With Quote
Old 03-25-2019, 08:17 AM   #4836
Registered User
 
Join Date: Feb 2016
Location: SE USA
Posts: 322
Cat Delete Pipes

Dave, that's a great question. As an engineer I was trained to ALWAYS speak with data. Any comment I offer now needs to be taken with a grain of salt. I deleted the cats primarily for weight loss. It's the best approach to achieve performance gains. I'm a cyclist as well and strength to weight ratio is everything. These engines are well tuned from the factory so "modifying" more horsepower into them without a tune or significant engine work, well...just doesn't work well. Ergo, lose some weight.

So to finally answer your question, there are three things that I "noticed". First, the sound is definitely different. Not significant but subtle, as in deeper. Not sure why that would be??? Second, it "seems" to be a little quicker. Take this comment with caution as I could be simple mashing the pedal a little harder or my mind is probably playing tricks. Lastly, there is MUCH more room underneath the car to get the things. It was amazing how much room it opened up. Those are my thoughts for now.
Jgkram is offline   Reply With Quote
Old 03-25-2019, 09:20 AM   #4837
Registered User
 
Ciao's Avatar
 
Join Date: Dec 2015
Location: Denver
Posts: 866
Garage
Quote:
Originally Posted by Jgkram View Post
Dave, that's a great question. As an engineer I was trained to ALWAYS speak with data. Any comment I offer now needs to be taken with a grain of salt. I deleted the cats primarily for weight loss. It's the best approach to achieve performance gains. I'm a cyclist as well and strength to weight ratio is everything. These engines are well tuned from the factory so "modifying" more horsepower into them without a tune or significant engine work, well...just doesn't work well. Ergo, lose some weight.

So to finally answer your question, there are three things that I "noticed". First, the sound is definitely different. Not significant but subtle, as in deeper. Not sure why that would be??? Second, it "seems" to be a little quicker. Take this comment with caution as I could be simple mashing the pedal a little harder or my mind is probably playing tricks. Lastly, there is MUCH more room underneath the car to get the things. It was amazing how much room it opened up. Those are my thoughts for now.
I agree with that these P cars are engineered almost perfect from the factory and making them fast is cheaper and more effectively done by dropping weight.
Questions: 1. Do you have issues with passing emissions from dropping the Cats? (2) what was the purpose of wrapping the exhaust and what wrapping used?
__________________
5280 Cruising @High Altitude
Seal Gray & K&N Filter
Ciao is offline   Reply With Quote
Old 03-25-2019, 09:21 AM   #4838
01101
 
Join Date: Jul 2015
Location: CT
Posts: 587
Jgkram, that wrap job looks great, I'll have to take mine off and re-do it.
alm001 is offline   Reply With Quote
Old 03-25-2019, 10:46 AM   #4839
Registered User
 
Join Date: Feb 2016
Location: SE USA
Posts: 322
I think I forgot Dave's original question, sorry Dave. They are Top Speed pipes. I very much liked the quality of them (good welds, nice clamps, and fit almost perfectly). Ciao, I have not tested the emissions but no CEL thrown. I live in NC so emissions is not as big apparently out here as in CA. Not due for an inspection until next January but will do a follow up here then. I wrapped the exhaust because if you look at where the pipes are routed, they are very close to the axle boots. I wanted some protection for them as well as heat transfer to the rest of the engine. It would be nice to be able to attach a heat shield like the original pipes but that is beyond my skill level. The wrapping took a couple of attempts for sure. Part of it is skill from wrapping miles of bike handle bars and the rest is patience. I did cover with a high temp exhaust paint as well to help keep the wrap fibers in check and provide a little "environmental" (i.e. water) resistance. I purchased two, 2" wide 15 ft. long Lava wraps from Summit Racing for a total of $35. I used stainless steel hose type clamps to secure.
Jgkram is offline   Reply With Quote
Old 03-25-2019, 01:55 PM   #4840
Registered User
 
BruceH's Avatar
 
Join Date: Jun 2012
Location: Bedford, TX
Posts: 2,732
Garage
I have the Top Speed pipes as well. There shouldn’t be any problem with passing emissions, I’ve had them for years with no problems. The weight loss plus a bit more free flow makes a little bit of difference.

__________________
______________________________________________
2001 Boxster S Lapis Blue
TS Cat Bypass Pipes and exhaust
iPad Mini Dash Install
DEPO Tail Lights
BruceH is online now   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 05:27 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page