06-10-2015, 08:39 PM
|
#1801
|
Registered User
Join Date: Apr 2014
Location: Chicago
Posts: 329
|
Made my 200th forum post! But also still IMPATIENTLY waiting on my GT3 rep sideskirts and Cayman S spoiler to come in
__________________
'99 Porsche Boxster 986 - weekend car
'04 BMW 645ci e63 - daily driver
'98 BMW 528i e39 - dog carrier
|
|
|
06-10-2015, 08:44 PM
|
#1802
|
Registered User
Join Date: Jun 2015
Location: Massachusetts
Posts: 97
|
Picked it up and drove it
New Porsche Boxster owner and new member. Picked my car up from the shop yesterday after purchasing it a week or so ago. Needed some work based on the ppi. Mainly brakes (pads and rotors) and ignition coils. I also chose "some" elective preventative maintenance procedures (I.e. clutch, imsb, rms, aos). Drove it home in a rainstorm but still had a blast. Top down driving today what a great car! 03 boxster s black on black 76k miles. I am still not sure about the decals on the sides but will keep them for a while and decide later. They have grown on me quite a bit since I first saw the car. Shop said they can remove them very easily if I change my mind.
|
|
|
06-10-2015, 09:17 PM
|
#1803
|
Need For Speed
Join Date: Feb 2013
Location: Funville
Posts: 2,112
|
Good looking ride Myoung73.
I like the stripes.
|
|
|
06-10-2015, 09:57 PM
|
#1804
|
Registered User
Join Date: Oct 2014
Location: California Central Coast
Posts: 1,476
|
I like it Myoung73! Sounds like you removed half the fun which is working on it! You have the critical items addressed... IMSB ! Did the shop give you the old bearing? If so how did it look. Enjoy the ride!
|
|
|
06-11-2015, 05:04 AM
|
#1805
|
Registered User
Join Date: Mar 2015
Location: Ellisville, MS
Posts: 102
|
Taking her in for IMSB upgrade and RMS. Lead mechanic is at Porsche school all of next week so I will not have the Box for two weeks. Well worth the wait since, reading all the grenaded engine posts resulting from IMSB, I will finally get peace of mind!
__________________
2001 Boxster S: Triple Black, Sport Package, Special Chasis Rigidly Tuned, Headlight Washers, Turbo Wheels, Litronics, Full Leather, 03 Top, Sumitomo HTR ZIII, IMS/RMS, Kenwood KDC-BT562U, DEPO Tails, Cocomats, KUDA Cellphone Holder, Ultimate Cupholders, Zaino Shine
PCA-MAGNOLIA
|
|
|
06-11-2015, 06:12 AM
|
#1806
|
I am my own mechanic....
Join Date: Feb 2013
Location: Salt Lake City, UT
Posts: 3,432
|
Drove the ever loving (or is it living??) SHEET out of it!!!!!
Still smells hot.....
__________________
'04 Boxster S 50 Jahre 550 Spyder Anniversary Special Edition, 851 of 1953, 6-sp, IMS/RMS, GT Metallic silver, cocoa brown leather SOLD to member Broken Linkage.
'08 VW Touareg T-3 wife's car
'13 F150 Super Crew long bed 4x4 w/ Ego Boost
|
|
|
06-11-2015, 09:28 AM
|
#1807
|
Registered User
Join Date: Jun 2015
Location: Massachusetts
Posts: 97
|
Quote:
Originally Posted by 911monty
I like it Myoung73! Sounds like you removed half the fun which is working on it! You have the critical items addressed... IMSB ! Did the shop give you the old bearing? If so how did it look. Enjoy the ride!
|
Thanks! Yea I wanted to get the work done for peace of mind. They didn't give me the bearing (I should have asked) but I did ask he said it looked fine. Oh well u never know until you take it out anyway and from what I have learned they can look fine one day and fail the next. Plus it was getting time for a clutch anyway. The car is awesome, fast, handles on rails and just so much fun to drive. I am so excited. Also many thanks to this forum as I did quite a bit of research here first! I hope to start doing projects on my own with the help of the amazing community here!
|
|
|
06-13-2015, 09:06 PM
|
#1808
|
Toppy
Join Date: Apr 2014
Location: Dorchester, ON, Canada
Posts: 140
|
Started off just changing the belt, there was a slight sound from the idler hubs, removed them to replace the bearings but could not find any in the city on a Saturday. Went old school, removed the bearing seals and re packed the bearings with high temp grease. After reassembly, belt is quite. No problems after a 200 mile drive this afternoon.
__________________
1999 Boxster
Arena Red/Graphite Grey Interior/Black 03 Top/550 All Red Tail Lights
|
|
|
06-14-2015, 04:37 AM
|
#1809
|
Registered User
Join Date: May 2008
Location: Dickinson, TEXAS
Posts: 148
|
Changed the oil and filter... no metal in filter, YAY!
__________________
Be careful, the car/girl/boat you just bashed is someone's pride and joy!
2001 Boxster S, 2007 Cayman SOLD, 2013 Abarth Cabrio
1970 Donzi 18 Holman Moody
|
|
|
06-14-2015, 05:20 AM
|
#1810
|
Registered User
Join Date: May 2013
Location: North Alabama
Posts: 2,079
|
Short Shifter
Installed and love the difference
|
|
|
06-14-2015, 10:08 AM
|
#1811
|
Registered User
Join Date: Feb 2015
Location: QC
Posts: 412
|
Overdue
|
|
|
06-14-2015, 10:27 AM
|
#1812
|
Registered User
Join Date: Jul 2010
Location: California
Posts: 1,859
|
Replaced the seals on the spark plug tubes... For the second time.
__________________
Jäger
300K Mile Club
|
|
|
06-14-2015, 02:33 PM
|
#1813
|
Registered User
Join Date: Feb 2015
Location: QC
Posts: 412
|
After topping up the power steering fluid I accidentally dropped the drivers sidetop ball retaining clip down the drain.
Made a new one out of some thin stainless welding rod.
Also washed, waxed, and rainexed.
|
|
|
06-16-2015, 05:22 PM
|
#1814
|
Registered User
Join Date: Apr 2013
Location: Buffalo NY
Posts: 184
|
Used the mothers kid to restore my headlights. The process removed the yellow and cleared them up very well.
|
|
|
06-17-2015, 08:47 AM
|
#1815
|
Need For Speed
Join Date: Feb 2013
Location: Funville
Posts: 2,112
|
Looks good cardiffgiant. I used the mothers kit to restore my headlights too, but I also used Dupli-Color's headlight sealer uv protectant. Mothers is better for the restore than the Dupli-Color, but the headlight protectant is much better in the Dupli-Color kit. You might look into getting it, to protect your headlights better.
|
|
|
06-17-2015, 10:32 AM
|
#1816
|
Registered User
Join Date: Apr 2013
Location: Buffalo NY
Posts: 184
|
I did use a protectant from a different brand. I don't recall if it was duplicolor. I had the same concern. The Mothers kit has everything that you need to eliminate deeper imperections, but then leaves the plastic exposed to UV.
If the sealant that I used was something different, I'll grab some of the duplicolor. while the process was veyr smooth, I'm not eager to do it again any time soon.
|
|
|
06-17-2015, 09:37 PM
|
#1817
|
Need For Speed
Join Date: Feb 2013
Location: Funville
Posts: 2,112
|
It's just as easy to use as they show in the video. You would have to work hard at messing it up, just make sure there isn't a bunch of dust around.
|
|
|
06-18-2015, 04:06 PM
|
#1818
|
Twinjoe
Join Date: Mar 2015
Location: Tacoma-Seattle
Posts: 3
|
Great ride up Mt. St Helens
Sunday AM we took off for Spirit Lake on Mt. St. Helens. About a 240 mile round trip from home. Great roads (many curves very light traffic in the morning, a few partial washouts that cause some fun whoop de doos) Seeing the very slow recovery of the mountain makes this my favorite route to see St. Helens. If you are in the area you must do this ride.
|
|
|
06-18-2015, 11:23 PM
|
#1819
|
Teddyonine
Join Date: Dec 2012
Location: Charleston WV
Posts: 57
|
Clay barred the body and glass- amazing results. Followed up with Black Wax. I highly recommend the claying process- gonna do my golf cart next.
|
|
|
06-20-2015, 01:58 AM
|
#1820
|
Registered User
Join Date: May 2010
Location: MN
Posts: 59
|
Hey MN are you with any Porsche groups I live in Winona?
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is On
|
|
|
All times are GMT -8. The time now is 01:01 AM.
| |