Go Back   986 Forum - for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Reply
 
LinkBack Thread Tools Display Modes
Old 08-15-2012, 12:43 PM   #1
Registered User
 
Join Date: May 2012
Location: CO.
Posts: 7
front passenger seat removal

Hello: I just purchased a 2005 Boxster and the previous owner left a large CD case holder under the passenger seat and from moving the seat forward and back the drive motor came disconnected from the left hand drive rail mechanism. I have been able to remove the back two torx screws from the back rail. But unable to find the two front torx screws for the front rails, I have removed the plastic cover over the front rails. The seat is stuck in the forward position. Is access to the front two torx screws from underneath the car, under the plastic cover? Any assistance will be much appreciated.

Thank you;
Gerd
Gerd is offline   Reply With Quote
Old 08-15-2012, 07:03 PM   #2
Track rat
 
Topless's Avatar
 
Join Date: Nov 2006
Location: Cucamonga CA
Posts: 3,644
Garage
Under the plastic cover at the forwardmost end of the mounting rail. Remember to leave your keys out if you plan to disconnect the seat belt sensor wiring otherwise you will trip an airbag light on the dash.
__________________
2009 Cayman 2.9L PDK (with a few tweaks)
PCA-GPX Chief Driving Instructor
Topless is offline   Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 03:53 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page