Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Post Reply
 
LinkBack Thread Tools Display Modes
Old 11-27-2011, 03:59 PM   #1
Registered User
 
97 Boxster's Avatar
 
Join Date: Feb 2010
Location: Phoenix, Arizona Baby
Posts: 495
Thinking of ordering the parts and doing this myself. I am pretty handy but is there anything I should do that you would have done differently? Looks like I have another weekend project coming up.

Also a detailed list of what tools/parts needed would be great. My car started smoking on startup today and had a rough idle throughout the day. I also started the car and removed the oil cap and there is a ton of "sucking" going on. Looks like I need to get to this asap.
__________________
2006 Hummer H3 - RED 76k mi - LIFTED - 3rd row custom seating on 35's and a manual tranny.
1997 Boxster Guards - RED 86k mi - 19" Lobster Claw Wheels on Conti's , Porsche side decal for extra "speed", manual tranny -signed by Hurley Haywood
Phoenix, Arizona
97 Boxster is offline   Reply With Quote
Old 11-27-2011, 08:41 PM   #2
Registered User
 
nieuwhzn's Avatar
 
Join Date: Nov 2010
Location: Long Island, NY
Posts: 296
Garage
Quote:
Originally Posted by 97 Boxster View Post
Thinking of ordering the parts and doing this myself. I am pretty handy but is there anything I should do that you would have done differently? Looks like I have another weekend project coming up.

Also a detailed list of what tools/parts needed would be great. My car started smoking on startup today and had a rough idle throughout the day. I also started the car and removed the oil cap and there is a ton of "sucking" going on. Looks like I need to get to this asap.
Make sure you read the usual stuff:
airoilseparatorreplacement - mikefocke2
Pelican Technical Article: Boxster Air / Oil Separator Replacement - 986 / 987
Replace the Air/Oil Separator

I basically replaced the AOS without removing anything else and working from the top of the engine, not an experience that I'd like to repeat. I probably would try to follow Pedro's advice and remove some more stuff from the top to get better access.

The only special tool that you NEED is the cable operated hose clamp pliers.

Good luck.
nieuwhzn is offline   Reply With Quote
Old 11-28-2011, 05:09 PM   #3
Registered User
 
97 Boxster's Avatar
 
Join Date: Feb 2010
Location: Phoenix, Arizona Baby
Posts: 495
Well yesterday I had some smoke at 2 different startups as well as a rough idle. Today it ran like a dream all day. No smoke and no rough idle. Explanation!!

Don't want to replace if I don't have too.

Hmmmmm. Should I wait until its smokes again? Still tons of sucking from the oil fill tube.
__________________
2006 Hummer H3 - RED 76k mi - LIFTED - 3rd row custom seating on 35's and a manual tranny.
1997 Boxster Guards - RED 86k mi - 19" Lobster Claw Wheels on Conti's , Porsche side decal for extra "speed", manual tranny -signed by Hurley Haywood
Phoenix, Arizona
97 Boxster is offline   Reply With Quote
Old 11-28-2011, 09:29 PM   #4
Registered User
 
Join Date: Jan 2008
Location: atl
Posts: 363
Quote:
Originally Posted by 97 Boxster View Post
Thinking of ordering the parts and doing this myself. I am pretty handy but is there anything I should do that you would have done differently? Looks like I have another weekend project coming up.

Also a detailed list of what tools/parts needed would be great. My car started smoking on startup today and had a rough idle throughout the day. I also started the car and removed the oil cap and there is a ton of "sucking" going on. Looks like I need to get to this asap.
i wasn't even able to remove to the cap.
__________________
-Tuan
tuanle16@juno.com
tuanle16 is offline   Reply With Quote
Old 11-29-2011, 09:48 AM   #5
Registered User
 
97 Boxster's Avatar
 
Join Date: Feb 2010
Location: Phoenix, Arizona Baby
Posts: 495
Quote:
Originally Posted by tuanle16 View Post
i wasn't even able to remove to the cap.
I can remove the cap no problem but when I do the car runs really crappy.
__________________
2006 Hummer H3 - RED 76k mi - LIFTED - 3rd row custom seating on 35's and a manual tranny.
1997 Boxster Guards - RED 86k mi - 19" Lobster Claw Wheels on Conti's , Porsche side decal for extra "speed", manual tranny -signed by Hurley Haywood
Phoenix, Arizona
97 Boxster is offline   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 07:42 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page