Go Back   986 Forum - for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

LinkBack Thread Tools Display Modes
Old 06-01-2005, 06:00 AM   #1
Registered User
Join Date: Jun 2005
Location: Indiana
Posts: 22

Have ordered a new windstop/deflector for my 01 boxster...any suggestions on the install of it? Do I need to drill holes in the roll bar for the install or can the monting brackets be glued on? Thanks for your help....

jboxster is offline   Reply With Quote
Old 06-01-2005, 07:43 AM   #2
Registered User
Brucelee's Avatar
Join Date: Jun 2004
Location: Des Moines, IA
Posts: 8,083

I am presuming your car did not come with the stop as a factory installed option? If not, are there any instructions from Porsche that came with the kit?
Brucelee is offline   Reply With Quote
Old 06-01-2005, 09:56 AM   #3
Registered User
Join Date: Aug 2004
Location: San Diego
Posts: 155
You don't need to drill. The holes are already there, beneath the roll bar padding. The roll bar padding can be removed by hand, but you have to pull very hard.

You will also need a rivet gun, to put the rivets in, or some small screws would probably do the trick also.

The hardest part is removing the roll bar padding - the 2 hoops and the center piece. It's on there tight. Be careful not to loose the little plastic things that hold the roll bar padding in place.

The dealer wants $190 for the labor to do the install. I asked. Ridiculous if you ask me.

Good Luck,
larez2 is offline   Reply With Quote
Old 06-01-2005, 10:00 AM   #4
Registered User
Join Date: May 2002
Location: San Jose
Posts: 1,889
Pull the roll bar padding off and see if the holes for the rivets are there. If not then they need to be drilled.
Tool Pants is offline   Reply With Quote
Old 06-01-2005, 01:53 PM   #5
Registered User
Join Date: Jul 2004
Location: Houston, Texas
Posts: 7,236
My clear windscreen rattles so badly that I have come up with a new design and will hopefully produce it for sale. Guaranteed to cost far less and eliminate all rattling or your money back!

I'm gonna get some roll bar hoops manufactured while I'm at it and sell those too. They're rediculously priced from the dealer AND the stolen (oops, I meant "used") ones sold on Ebay for that matter!

RandallNeighbour is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -8. The time now is 12:02 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page