Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Post Reply
 
LinkBack Thread Tools Display Modes
Old 06-02-2010, 05:20 PM   #1
Registered User
 
Quickurt's Avatar
 
Join Date: Jul 2007
Location: Coastal Oak Forest
Posts: 1,069
Sometimes we Krauts live up to our hard-headed reputations.
Long, long ago, in a galaxy not too far away, Porsche made a 1300 CC 356 engine with roller bearing main bearings. Great little motor.....until you "lugged" it one time and Kaput! the roller bearings self destructed within short order. For those who don't understand the term "lugged" it is what happens when you drop the RPM too low in gear and then try to accelerate away. It's a nasty sound and a really nasty vibration that does terrible things to your crankshaft, bearings, connecting rods and pistons.
In any case, Porsche went back to plain main bearings and the problem went away with the change. So..................can someone explain why Porsche would put more roller or ball bearings inside the engine????
The only explanation I can come up with is the distance the intermediate shaft is from other pressure lubed rotating shafts and they are saving the porting/runners/tubing to get pressure oil to it?
__________________
Sold - Black on Sand Beige 2006 S - 48K miles
18x8.5 and 10 OZ Alleggerita HLT Anthracite wheels and anthracite Cayman side grilles - lovingly adjusted Schnell Short Shift
Quickurt is offline   Reply With Quote
Old 06-02-2010, 06:42 PM   #2
Registered User
 
roadracer311's Avatar
 
Join Date: May 2007
Location: San Francisco, CA
Posts: 218
I've thought for a while now that lugging the motor probably contributes to the RMS failures. Explains why the tips fail less often (the production numbers for tips are higher than you might think, or at least they were prior to 2007 when I was researching to buy mine.) So it was interesting to see some history (from Quickurt) of lugging a motor leading to roller bearing failure.

It would be interesting to know if Porsches in countries with higher octane fuel also have the same level of RMS failures. Lugging can also cause pinging (even with a car designed to tune on the fly to eliminate pinging). Pinging can send all sorts of forces and vibrations through a car
__________________
2003 Boxster S
1995 Ferrari F355 Spider
San Francisco, CA
roadracer311 is offline   Reply With Quote
Old 06-02-2010, 07:24 PM   #3
Engine Surgeon
 
Join Date: Aug 2008
Location: Cleveland GA USA
Posts: 2,425
Quote:
You need data, scientific data to analyze and then you need to test a theory in reality to see if the hypothesis is correct.
Correct. that data needs to be gathered with as few variables as possible.

Quote:
The only person that seems to be doing that is Jake.
Thats because all I do is basically gather data and perform tests. I first did this with aircooled Porsches, then moved to the M96.

Quote:
As much as I disagree with his marketing approach and fear mongering he is approaching it from a scientific standpoint and I applaud him for that.
I invite ANY of you to come to my office for a day, sit between Dean and I and listen to the phone calls; I'll even let you read our emails. When you do this you will see that what I have stated isn't fear mongering, it is plain and simply the truth. It is impossible to share the experiences that we face daily with these engines and the results not to be negative. The reason for this is the fact that people seldom call on us before their engine fails or before they have a bad experience, we are much like morticians.

Trust me, if I was willing to put up with the bull**************** related to sharing EVERYTHING that we see here the term fear monger would be an understatement. I quit posting on forums because I had nothing good to offer, there are no fairy tells here. I even quit adding the details related to the modes of failure to my site because people couldn't handle the truth and because I don't have the talent to bull**************** anyone into reading about a "good" failure mode with these engines.

We deal with carnage daily that ranges from intermix, cracked heads, IMS failures and the like because thats what we do and we are the only real specialists in the US that go this deeply into the engine. Aside from the wise people that schedule a preventive IMS procedure with us or the people who want big power from a new FSI engine, EVERYTHING else we deal with is the direct result of a catastrophic or near catastrophic failure. There are always those cases related to things that no one else can diagnose or repair. We do not do service work, we do not complete tune ups, but we do disassemble some really mangled parts and pick up lots of pieces. We don't work on any other aspect of the car other than the engine.

Like I said, we are M96 Morticians, we get the death calls and we hear the sob stories and I even have recordings of owners CRYING when they left us voicemails after an engine death. Like I said, I don't have to make this sound worse than it is to get business, hell I had to STOP talking about it to keep from pissing people off!

Its plain and simple, we are backlogged for months because we took the time several years ago to understand this beast and tame it. We also took the initiative when others called us idiots to develop the upgrades for the engine and because of that this economy hasn't hurt us at all. We have more business than we can handle so don't ever think that I am making things sound worse in hopes of gaining business, in fact we are turning work down and have been for two years off and on.

Quote:
What was interesting to me were the comments that he made recently about abusing the Boxster motor intentionally to blow it up and cause failure. All of the things he was doing were like fingernails on the chalkboard to me, reving a cold engine, banging on the limiter in first gear, the list was long. Reading it was aweful. Last I heard he had not blown it up yet.
It still hasn't blown up. It'll soon be seeing service in the most demanding application possible. To me engines are tools, and I push their buttons to find what makes them tick and ultimately what makes them go boom. What I learned from treating that engine horribly is something I'll never share, because no one would believe it.

Quote:
The point is that you can have as many Eureka moments as you want but without research, data and experimentation you may as well make sacrifices to a head of cabbage, it will be just as effective as this speculation
I agree.

Charles from LN and I have some really good hunches as to what actually creates the IMS issues, but I'd never post that here or anywhere else. I told a writer from a prominent publication that I refused to divulge the information, even though he was willing to PAY me for the interview (THIS WAS NOT EXCELLENCE!).

I have often wondered what would happen if I started a twitter account and posted every phone call we receive related to a failure and every email that we receive on the same topic as soon as they occur... I guarantee I'd be called everything under the sun by the 3rd day we created the account. Trust me, what I have shared isn't anywhere near what I can share.

What matters is we have repairs and preventives for the majority of the 20 different modes of failure, people seem to overlook the good we have done. Thats par for the course and it sucks.
__________________
Jake Raby/www.flat6innovations.com
IMS Solution/ Faultless Tool Inventor
US Patent 8,992,089 &
US Patent 9,416,697
Developer of The IMS Retrofit Procedure- M96/ M97 Specialist

Last edited by Jake Raby; 06-02-2010 at 07:31 PM.
Jake Raby is offline   Reply With Quote
Old 06-02-2010, 11:15 PM   #4
Registered User
 
Steve Tinker's Avatar
 
Join Date: Dec 2008
Location: Queensland, Australia
Posts: 1,522
Only some people overlook the good you have done (& shared) Jake - a lot of others appreciate your work, whether its your bread and butter or not....
__________________
2001 Boxster S (triple black). Sleeping easier with LN Engineering/Flat 6 IMS upgrade, low temp thermostat & underspeed pulley.
2001 MV Agusta F4.
Steve Tinker is offline   Reply With Quote
Old 06-03-2010, 06:07 AM   #5
Registered User
 
Join Date: Apr 2009
Location: Mercer Island, WA
Posts: 99
Quote:
Originally Posted by Jake Raby
Like I said, we are M96 Morticians, we get the death calls and we hear the sob stories and I even have recordings of owners CRYING when they left us voicemails after an engine death.
Interesting analogy. Morticians presumably get calls when people are dead or dying in the forseeable future. But while a mortician can reasonably tabulate the causes of death that he sees, an actuary would be the right person to ask about your chances of dying.

In our world, the automobile actuaries are Porsche (though they don't share their results, you can perhaps infer from their actions), Consumer Reports, JD Powers, and so on. As far as I have been able to determine, not one of them has tabulated greater than "average" major engine failures on M96-engine Porsches.
__________________
2003 Porsche Boxster S - Speed Yellow (sold)
2005 Lexus LS430 ML
2006 Lexus GX470

Last edited by CenterIsl; 06-03-2010 at 07:03 AM.
CenterIsl is offline   Reply With Quote
Old 06-03-2010, 07:47 AM   #6
Engine Surgeon
 
Join Date: Aug 2008
Location: Cleveland GA USA
Posts: 2,425
Exactly.. Thats why when I am asked how long an engine will live I reply "How long will you live?" In a mechanical world nothing can be accurately forecast for a life span, hell not even the weather man can make an accurate forecast these days!
__________________
Jake Raby/www.flat6innovations.com
IMS Solution/ Faultless Tool Inventor
US Patent 8,992,089 &
US Patent 9,416,697
Developer of The IMS Retrofit Procedure- M96/ M97 Specialist
Jake Raby is offline   Reply With Quote
Old 06-03-2010, 02:49 PM   #7
Registered User
 
Join Date: Sep 2009
Location: The City
Posts: 1,084
Garage
"but I'd never post that here or anywhere else. "

"What I learned from treating that engine horribly is something I'll never share, because no one would believe it."

I don't really understand this (in all sincerity and curiosity) why do you feel this way about sharing your knowledge?
Lobo1186 is offline   Reply With Quote
Old 06-03-2010, 05:31 PM   #8
Registered User
 
Join Date: Apr 2010
Location: Hawaii
Posts: 7
IMS failure theory

Excellent forum gentleman.

My 1999 just turned 40K miles. It's never overheated but in Hawaii it's 72-86 degrees year round. Water temp gauge is seldon above 185. Air conditioner never used......top is always down. No oil leaks and the Box get new blood every 5K. Never over RPM'd above 6000 and never lugged under 2500. Electronically re-engineered with original factory settings to maximize gas mileage 24 city/30 hwy. (Sorry Al Gore) no emission standards in Hawaii. This also increased horsepower by 50-75 and my 99 2.5L now leaves my neighbors 2002 3.2L S in the rear view mirror. Treat it with respect and it will last forever. I personally have met 3 people with IMS failure, and they all have tried to have the RPM gauge do cartwheels. Bad idea. Constant High RPM's allows for that little intermediate shaft bearing to go bizerk. Bad design,......but when you know the cause of failure you avoid what causes failure. High oil temp and high water temp,.....equates to cracked heads and coolant leaking into cylinders, and thus internal motor failure.
Kale is offline   Reply With Quote
Old 06-03-2010, 06:20 PM   #9
Engine Surgeon
 
Join Date: Aug 2008
Location: Cleveland GA USA
Posts: 2,425
Quote:
Originally Posted by Lobo1186
"but I'd never post that here or anywhere else. "

"What I learned from treating that engine horribly is something I'll never share, because no one would believe it."

I don't really understand this (in all sincerity and curiosity) why do you feel this way about sharing your knowledge?
Due to previous experiences that haven't been positive.. What we see most everyday defies conventional wisdom and in this world a lot of armchair mechanics (most of which have ZERO direct experience with the M96 engine) can really push our buttons and start keyboard combat.

It didn't use to be like this... People used to appreciate first hand accounts, but its just not that way anymore. I learned very quickly that what we could share would be limited with the M96 following, what makes it worse is giving info for free that can't be sourced anywhere else and still having to hear crap! So, looks like most everything we'll be sharing in the future will be for sale; if I am going to hear crap I at least want to get paid for it!

As far as the IMS failure and RPM, well from what we see the IMS bearing LOVES RPM, but thats another one of those things that doesn't make sense to those who haven't been exposed to the carnage.

Thats just the facts... The Engineers are the worst, followed closely by statisticians, neither of which generally own a toolbox.
__________________
Jake Raby/www.flat6innovations.com
IMS Solution/ Faultless Tool Inventor
US Patent 8,992,089 &
US Patent 9,416,697
Developer of The IMS Retrofit Procedure- M96/ M97 Specialist
Jake Raby is offline   Reply With Quote
Post Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 01:24 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page