Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Post Reply
 
LinkBack Thread Tools Display Modes
Old 05-10-2010, 12:00 PM   #1
Registered User
 
Join Date: Oct 2009
Location: USA
Posts: 63
The part I replaced is index number 8 in the attached drawing. I was thinking I might hear from someone that actually replaced their arms with the adjustable arms and hear what sort of experience they had. I am thinking RandallNeighbour may be on to something with the slippery slope. RandallNeighbour are you saying that index 17 may be causing the noise?
dragonflyoh is offline   Reply With Quote
Old 05-10-2010, 01:34 PM   #2
Registered User
 
ppbon's Avatar
 
Join Date: Nov 2005
Location: Florida
Posts: 529
Many times the rattle comes from...

... worn drop links.
If you can manually twist the droplinks with the car on its wheels, they're probably toast.
Good droplinks should be very difficult to move by hand because the joints are tight. After the joints wear they can generate a loud rattle when going over bricks, pavers, etc.

Happy Boxstering,
Pedro
__________________
Racecar spelled backwards is: Racecar!
ppbon is offline   Reply With Quote
Old 05-10-2010, 02:06 PM   #3
Registered User
 
Join Date: Jul 2004
Location: Houston, Texas
Posts: 7,243
Dragonfly, ignore what I wrote above. I didn't realize you bought an adjustable trailing arm (#8)... I though you'd replaced #17 with an adjustable unit (that's what I did).

Sorry about that.

Do test your drop links according to Pedro's advice. That's a good word from him.

Last edited by RandallNeighbour; 05-10-2010 at 02:11 PM.
RandallNeighbour is offline   Reply With Quote
Old 05-11-2010, 07:25 AM   #4
Registered User
 
Join Date: Oct 2009
Location: USA
Posts: 63
Drop Links

Thanks for the help.
I was able to move the drop links, with WOW, and using gloves. Not a lot of motion but enough that I will replace them. I found them on E-bay,(Deutsche has a pair of drop links for $67), Pelican, and requested pricing from Sunset. I shall replace the torsion bar bushings at the same time.
I shall post the results.
dragonflyoh is offline   Reply With Quote
Old 05-11-2010, 08:01 AM   #5
Registered User
 
Join Date: Jul 2004
Location: Houston, Texas
Posts: 7,243
Dragonfly, read this carefully:

RUN AWAY FROM DEUTSCHE PARTS ON EBAY.

Their stuff, especially their drop links, are total crap. I know this from repeated personal experience. Learn from my failures.

Buy factory parts unless you have $$$ to spend per corner for Tarrett Engineering fully adjustable ones.

Check with Sunset Imports in Oregon. They sell at 10% over their hard cost plus shipping. Sometime they are a LOT cheaper than anyone else.
RandallNeighbour is offline   Reply With Quote
Old 05-11-2010, 08:59 AM   #6
Registered User
 
Join Date: Oct 2009
Location: USA
Posts: 63
RandallNeighbour,
Thanks for the warning. After I posted my comment I did some searching on DEUTSCHE and decided they were off my list. I read some of your comments as well as from owners of several different models of automobiles and they were all in agreement with your assessment. I shall see what Sunset comes up with. Thanks again.
dragonflyoh is offline   Reply With Quote
Old 05-11-2010, 01:43 PM   #7
Registered User
 
Join Date: Apr 2006
Location: nj
Posts: 389
You might also want to consider these as a better alternative to new factory drop links.

http://www.tarett.com/items/boxster~cayman-products/986-987-rear-drop-link-set-986rdlnk-detail.htm
gschotland is offline   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 04:10 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page