06-27-2010, 02:37 PM
|
#1
|
|
Registered User
Join Date: Jun 2010
Location: Maui, HI
Posts: 66
|
Is this too hot?
Seams a little higher than it should be.
|
|
|
|
06-27-2010, 03:17 PM
|
#2
|
|
Registered User
Join Date: Apr 2009
Location: Australia
Posts: 328
|
That's pretty hot for 5:39am?!
Sam
|
|
|
|
|
06-27-2010, 03:18 PM
|
#3
|
|
Registered User
Join Date: Jan 2010
Location: Redmond, Wa
Posts: 369
|
Mine stays there a lot, when it's hot, in stop and go.. it goes to the middle of zero
Sasha
|
|
|
|
|
06-27-2010, 03:26 PM
|
#4
|
|
Registered User
Join Date: Jun 2010
Location: Maui, HI
Posts: 66
|
Quote:
|
Originally Posted by sparker
That's pretty hot for 5:39am?!
Sam
|
yeah, I disconnected the battery not too long ago and have not fixed it yet.
|
|
|
|
|
06-27-2010, 07:04 PM
|
#5
|
|
There Is No Substitute.
Join Date: May 2007
Location: West Coast
Posts: 3,253
|
Mine Boxster hangs right around there, and that is with clean radiators and no coolant problems. If it goes significantly past the zero then you should be concerned. 
__________________
1999 Ocean Blue Metallic Boxster - blueboxster.com
|
|
|
|
|
06-27-2010, 08:55 PM
|
#6
|
|
Registered User
Join Date: Jun 2010
Location: Maui, HI
Posts: 66
|
Ok, thanks Rick,
I figured it was good but was not sure. So much to learn about my new toy.
I have such a long list of parts I want. Starting with wheels but I cant figure out which ones I want. I am thinking something in a gun metal color.
|
|
|
|
|
06-28-2010, 01:02 AM
|
#7
|
|
Registered User
Join Date: Dec 2008
Location: Queensland, Australia
Posts: 1,522
|
Don't worry about the spend on wheels - invest in the the Raby / LN Engineering low temp thermostat, plus replace the coolant - if you do, you won't see temperatures like that again (unless you spend a lot of time in heavy traffic).
I'll wager that the coolant (and oil) temperature(s) are above what you see on the gauge.....
__________________
2001 Boxster S (triple black). Sleeping easier with LN Engineering/Flat 6 IMS upgrade, low temp thermostat & underspeed pulley.
2001 MV Agusta F4.
|
|
|
|
|
06-28-2010, 04:10 AM
|
#8
|
|
Registered User
Join Date: Mar 2009
Location: here
Posts: 244
|
it's a little higher than my s gets, but nothing too alarming.
|
|
|
|
|
06-28-2010, 07:17 AM
|
#9
|
|
Registered User
Join Date: Apr 2010
Location: Canada
Posts: 3,121
|
hey mb, check out the oz alleggerita rims on tirerack.com; light, gunmetal and (relatively) inexpensive (for the weight).
|
|
|
|
|
06-28-2010, 07:21 AM
|
#10
|
|
Registered User
Join Date: Nov 2006
Location: Bastrop, TX
Posts: 705
|
low temp thermostat and porsche coolent change, Highly recommend redline "water wetter"- 10$. It lowered my max temputure by 15 degrees.
Also if you are going to do the thermo, then I would also put in a new waterpump. It is bound to go out soon if it is original.
I have a scan tool that shows real time water temps. I was getting 225 on a regular basis. Now I only get up to 210 max, usally hangs at 202.
You must remove the bumper and clean the radiators, and move the front radiators to get to the junk inbetween the two.
I bought a radiatior comb for 2$ at auto store to fix the bent vains.
__________________
2002 S
Pedro rear stabilizer bar, CF strut braces, Maxspeed headers with 100 cell cats, Fabspeed cat bypass pipes, H&R springs with M030 setup, TRG rear links, EVO air intake, B&M Short shift kit, Raby IMS upgrade, Raby underdrive pulley
|
|
|
|
|
06-28-2010, 12:09 PM
|
#11
|
|
Registered User
Join Date: Jun 2010
Location: Maui, HI
Posts: 66
|
Quote:
|
Originally Posted by jhandy
low temp thermostat and porsche coolent change, Highly recommend redline "water wetter"- 10$. It lowered my max temputure by 15 degrees.
Also if you are going to do the thermo, then I would also put in a new waterpump. It is bound to go out soon if it is original.
I have a scan tool that shows real time water temps. I was getting 225 on a regular basis. Now I only get up to 210 max, usally hangs at 202.
You must remove the bumper and clean the radiators, and move the front radiators to get to the junk inbetween the two.
I bought a radiatior comb for 2$ at auto store to fix the bent vains.
|
Yeah, I did remove the front bumper and clean out the radiators but there was no change. I will try the other things to make sure it helps.
|
|
|
|
|
06-28-2010, 12:46 PM
|
#12
|
|
Registered User
Join Date: Nov 2006
Location: Bastrop, TX
Posts: 705
|
they say lifetime coolent- but if it is original- changeing will not hurt. but keep in mind the coolent is a little expensive, so if you re going to change it, do the thermo, and also give thought to the pump.
if the fans turn on at 212 like they should, then I would just try water wetter.
keep in mind, your temp is more or less normal.
__________________
2002 S
Pedro rear stabilizer bar, CF strut braces, Maxspeed headers with 100 cell cats, Fabspeed cat bypass pipes, H&R springs with M030 setup, TRG rear links, EVO air intake, B&M Short shift kit, Raby IMS upgrade, Raby underdrive pulley
|
|
|
|
|
06-28-2010, 08:00 PM
|
#13
|
|
Registered User
Join Date: Aug 2009
Location: MD
Posts: 628
|
Mauiboxster, your reading looks normal. I went out driving today and air temp was around 100 degrees F. My gauge read about the same as your pic, went to the right edge of the zero in traffic. Turned on my AC diagnostics(not sure about accuracy) and coolant temp read 104degrees C (219F) was the highest that I saw.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is On
|
|
|
All times are GMT -8. The time now is 05:45 AM.
| |
Porscha
Linear Mode
