Air Bag Dash Strips

[Boxtaboy]

Originally Posted by Christian H

My first post was on this very subject and this is how I tackled it

Help required with interior trim!

Chris.

When you secured the new strips in place, did you just glue them in, or did you screw them in place from behind? Thx.

[Christian H]

I just screwed them back in place using a flexy shafted driver and the original screws, I have done this a couple of times now(after changing from standard to silver then to body colour) and it's pretty straightforward.

[andre69]

Thanks to all of you guys for your help to late for me ,I should wait for you, but I though when I first stared it going to be a lot easier and did it without think what it 's going to happen.I know now for the next time and to help others.I just glue them back with silicon.So far they work.Any idea how to try to fix at least a little bit the dash board is above and below the one right behind the wheel in the center.Thanks one more time.

[Boxtaboy]

Originally Posted by Christian H

I just screwed them back in place using a flexy shafted driver and the original screws, I have done this a couple of times now(after changing from standard to silver then to body colour) and it's pretty straightforward.

Thanks for that info. I was always hesitant to do this because I didn't want to just glue the new strips in place, as I always like OEM fitment. Now that I know you can screw the new ones in place just like the factory ones, maybe I'll give these a try.

Cheers.