hoping to get some pics later on.
but the experiment paid off.
1. baked the 03+ clears with the burnt lenses and remove the clear outer cover piece from them.
2. baked my headlights, removed the clear outer cover piece w/amber, scraped all of the old silicon seal out, placed a new bead of silicon seal, installed new clear piece.
a side benefit of this is that the clear headlights from porsche have an amber insert that some people have used a soldering iron to remove. these pieces are already clear from the old amber style. so now i have clear lights with clear turn signals. also installed a chromed amber bulb, so they still blink amber. i am very happy to be amber free. also installed my 550 edition tails on the same day.
also washed car a few hours after install. no fogging. let silicon cure for 24 hours before installing back on car. the sealing process seemed the same on these lights in general. the only annoying thing was removing the old silicon bead. it was dry and rubbery unlike the seals i've seen on subaru and vw.
here's the before pic.
here's the lights as purchased
you can see the inner lenses are burnt pretty bad.
after:
and the tails
Threaded Mode
