I am not sure where the post I just did went... Lets try this again.
I am providing a link here to the youtube videos of the ignition attempt.
2 vides are posted and this is where I am at.
https://youtube.com/shorts/3cKfVexGY4I?feature=share
https://youtube.com/shorts/KLIwHPbqBeM?feature=share
I have completed and prepped for.....
Replaced Ignition coils and inspected sparkplugs.
Replaced Fuel pump, sending unit and fuel filter
Removed fuel pump relay and connected the 1 wire bridge to force the fuel pump to perform but I do not hear anything coming from the fuel pump in regards to priming or hearing any activation to pressurize the fuel line.
Fuel is present in the line after the fuel filter replacement.
Tomorrow June 7th I will be doing an electrical trace to see if any wiring is damaged and not providing a current.
I have the durametric software for pc and a hand held odb reader but both are not showing anything until I get the car to fire up.
Any further suggestions would be greatly appreciated so I can run that down while I am doing my checks.
Thanks...