Quote:
Originally Posted by Starter986
Well... that did it. Came right out.
That and a bunch of residual coolant, and not under the pan.
OK. Cleaning up the thermo and WP surfaces... and will start buttoning things up.
Thank you.
|
D A M N.
One thing for certain... installing the water pump was a breeze with the motor mount out.
I used a trick I read somewhere upon these pages. Cut off the heads of a few proper size bolts... inserted them into a few holes for the WP and thermo... slid on the gaskets... introduced a couple bolts... removed the guide bolts... and boom.
However... that "boom" still took me another 3 hours and... I did learn a few new cuss words.
Tomorrow I'll tackle the new motor mount.
Just sayin...
G'nite.