Quote:
Originally Posted by aussieboxy
Have replaced the clutch but having a hell of a time getting the gearbox back it.
Issues getting it to line up. Have used a clutch alignment tool so the clutch should be right.
Any tips?
|
First and foremost: make sure you have the correct clutch.
I learned the hard way that the 5-spd clutch is different from the 6-spd. Same spline count, different diameter. Barely. So the input shaft wouldn't go in.
Once I had the correct clutch in, it sunk with a resounding "thunk".
I had the trans on a floor jack, balanced, and aimed it with my hand.
Sent from my SM-G930T using Tapatalk