|
As you can see in my Bio I've rebuilt one on my own as well. Search the internet for a Shop manual for a 99-03 this will give you a good step by step instructions. The You tube videos help put perspective you don't get from the manual.
I would take it apart and look at the block and heads carefully depending on your level of damage this can be cost prohibitive. You will need a couple sets of special tools to reassemble the engine. I believe the tools cost about $800 to $1000. Then add $2000 in gaskets, rings, bolts, ramps and a new IMS bearing kit about $695 - $1395. So your looking at about $4000 to rebuild. Or no work and By a salvage motor same cost some less.
__________________
2003 Black 986. modified for Advanced level HPDE and open track days.
* 3.6L LN block, 06 heads, Carrillo H rods, IDP with 987 intake, Oil mods, LN IMS. * Spec II Clutch, 3.2L S Spec P-P FW. * D2 shocks, GT3 arms & and links, Spacers front and rear * Weight reduced, No carpet, AC deleted, Remote PS pump, PS pump deleted. Recaro Pole position seats, Brey crouse ext. 5 point harness, NHP sport exhaust
|