View Single Post
Old 08-01-2006, 12:31 PM   #9
BoxsterSbob
Registered User
 
Join Date: Jun 2004
Location: NYC
Posts: 121
Hi, as a last resort you might want to try this:

www.griotsgarage.com/catalog.jsp?L1=L1_2500&L2=L2_2520&SKU=20264



A SPRAY-ON PROTECTION BRA THAT WON'T FLY OFF, AND IS EASY TO REMOVE!

When I first tested this product, I was skeptical. By now you know that I'm VERY finicky about my paint. So spraying a protective coating on the front of a Porsche would be silly, right? And when I was done with my road trip, having it peel up in one big sheet would be too easy to remove, right? Hard to believe, but that's exactly what it did with minimal fuss. I even applied the Protective Bra over the hood ornament! Finally an easy way to protect any surface from rock chips, abrasion, sand pitting, bug residue, etc. Other uses would include: inside an aluminum boat for a non-slip surface, aluminum stair treads, tool boxes, instant drawer liner, truck bed liners, car door thresholds (where your shoes scuff the paint), and on the back of hatches and trunks so you don't scratch the bumper or trunk lip. Water, oil, solvent and impact resistant.

The Paint Masking Film is necessary for this project; buy it and you'll have a number of other uses as well. Paint detailing and machine polishing, house painting, covering furniture from dust, even use it as a temporary indoor car cover! The roll folds out to 22" wide and 76' long! Clings to the surface electrostatically and won't slide off. Easy load dispenser includes a razor blade cutter to trim to the desired length. (Film and Dispenser sold separately.) One can covers approximately 12 sq. ft.


bob
'04S
borla
BMC
BoxsterSbob is offline   Reply With Quote