Thread
:
DIY Remote Range Improvement
View Single Post
02-12-2015, 04:08 PM
#
8
Fintro11
Registered User
Join Date: Jun 2013
Location: Nanaimo, Vancouver Island, British Columbia, Canada
Posts: 900
Quote:
Originally Posted by
Burg Boxster
Nice write up Fintro.
Suggestion... Instead of pulling really hard at risk of breaking A-pillar trim, merely reach down behind w/ a long screw driver and release clip at dash level holding in and it easily comes up and out.
VERY IMPORTANT TIP:
Do NOT over tighten the T-30 screws upon re-install or you'll have another DIY to perform...
http://986forum.com/forums/general-discussions/17135-convertible-top-receiving-latch-plate-thing.html
I tried reaching in with a screw driver but i could not get it in the right position, I was about to get the sludge hammer next
:dance:
Fintro11
View Public Profile
Visit Fintro11's homepage!
Find More Posts by Fintro11