|
If you read the text of the linked EBay ad early in this thread ,you'll read that the mesh contributes to wind noise. That makes me wonder why we don't try a full width Lexan windblocker. I made one for my Miata and attached it to the roll bar hoops with zip ties.It has worked flawlessly for over a year. For my XKE there is a clear windblocker that curves around at each outboard edge. You can bend thin polycarbonate/acrylic with/without the heat for a hair dryer(lots on You tube).
The 3 Porsche parts are very expensive and marginally effective. By comparison ,some Lexan/Plexiglass is cheap and this project requires no mods to the car.
|