I'm not a spec driver But have been using an accusump setup deep sump and stainless windage baffles for almost 3 seasons, Mine is a 2 quart tank. I have data on 2 oil pressure point. One at the tank and the other at the port on the bank 1 head where the pressure switch normally mounts. I do not see pressure below 70 on the tank and 60 on the motor while on track. I am seeing 240-250 degree oil temps. I'm interested in additional oil cooling above the S engine mount cooler.
__________________
2003 Black 986. modified for Advanced level HPDE and open track days.
* 3.6L LN block, 06 heads, Carrillo H rods, IDP with 987 intake, Oil mods, LN IMS. * Spec II Clutch, 3.2L S Spec P-P FW. * D2 shocks, GT3 arms & and links, Spacers front and rear * Weight reduced, No carpet, AC deleted, Remote PS pump, PS pump deleted. Recaro Pole position seats, Brey crouse ext. 5 point harness, NHP sport exhaust
|