986 Forum - The Community for Porsche Boxster & Cayman Owners - View Single Post

3RotorRx7 · 08-13-2013, 06:10 PM

Jake,
I agree with your assessment.
Using the photo, and the head as test jig, when I position the reluctor wheel at the point that looks correct and place it back in the head and put the cam locking tool on it, it appears that the edge opposite the number "0" is dead parallel with the top of the head. Can you, or anyone else, confirm this if you have a cam and head sitting around?

Thanks,
Erik

08-13-2013, 06:10 PM	#3
3RotorRx7 Registered User Join Date: Mar 2011 Location: Texas Posts: 22	Jake, I agree with your assessment. Using the photo, and the head as test jig, when I position the reluctor wheel at the point that looks correct and place it back in the head and put the cam locking tool on it, it appears that the edge opposite the number "0" is dead parallel with the top of the head. Can you, or anyone else, confirm this if you have a cam and head sitting around? Thanks, Erik Last edited by 3RotorRx7; 08-13-2013 at 07:05 PM.