WOW!
That cam grinder needs to be taken out back and whooped! The reluctor wheel must be positioned within a few tenths of a degree. I'd not even want to try to reallocate those reluctor wheels.
You'll have to try to use another cam thats untouched to create a jig to carry out this procedure. Its bad enough when the teeth are bent or twisted.
__________________
Jake Raby/www.flat6innovations.com
IMS Solution/ Faultless Tool Inventor
US Patent 8,992,089 &
US Patent 9,416,697
Developer of The IMS Retrofit Procedure- M96/ M97 Specialist
|