View Single Post
Old 08-08-2009, 07:07 PM   #4
Paul
Porsche "Purist"
 
Paul's Avatar
 
Join Date: Aug 2003
Location: Wisconsin
Posts: 2,064
Garage
You need to clear the code then turn the key on (without starting or touching the gas pedal) for about 90 seconds then turn the key off for at least 10 seconds.

This code can be caused by:

A loose connector at the sensor

Corrosion on the connector

Bad wiring from the sensor to the DME

Bad sensor

Bad DME
__________________
1998 Boxster with 7.8 DME, 2005 3.6 liter/325 hp, Variocam Plus, 996 Instrument panel
2001 Boxster bought new. Installed used motor at 89k.
1987 924S. 2002 996TT. PST2
Owned and repaired Porsches since 1974. Have driven them all the way the Dr intended...

Last edited by Paul; 08-08-2009 at 07:10 PM.
Paul is offline   Reply With Quote