|
No scraping noticed yet. They only issue i have is pulling into my garage. I have a small raise and the plastic fins on the bottom of the bumper scrape. Not a big deal at all.
The fin is an ebay special for @125 or so. works nice, I advise red locktite on the screws because they tend to loosen with time.
The only major issue was the tie rod ends on the rear. Remember to add a few $$$ when doing this mod. You cant get away without it. I tried and my camber was so off that the wheels would wear out on the inside. Aside from that, with the camber off, the grip was poor.
James
__________________
2002 S
Pedro rear stabilizer bar, CF strut braces, Maxspeed headers with 100 cell cats, Fabspeed cat bypass pipes, H&R springs with M030 setup, TRG rear links, EVO air intake, B&M Short shift kit, Raby IMS upgrade, Raby underdrive pulley
|