Quote:
Originally Posted by itsnotanova
How did you widen it? You have any pics of that process?
|
I did take a couple of photos during the process but cannot find them
Basically, I took a zip disk and cut the 1/4 panel from front to back, around the tail lights, cut the inner fender in the same way. lastly I cut it at the curving body line around the door. I pull it all outward about 1 1/2" and fill in the gap with welded in pieces of flat bar (1 1/2" x .0625"). After a million little spot welds, I topped everything off with some fiberglass filler and smoothed it all out.
If the pics turn up, I will be sure to post them.
Piper
Threaded Mode
