Those with 987 MAF Tube

[Newsguy]

I saw you gave up on making a connector. Were you unable to find them?

[NewArt]

Originally Posted by Newsguy

I saw you gave up on making a connector. Were you unable to find them?

You're right. I should shut up and watch my own videos! In the following episode I reveal the obvious solution 40 seconds into the video!
https://www.youtube.com/watch?v=UTGbH-6Krvs

[Newsguy]

Yes, I have returned the .2 version and ordered the .1
Are you happy with your plumbing or would you do anything different? After two tries, I think you might be an expert on the subject now!

[NewArt]

Originally Posted by Newsguy

Yes, I have returned the .2 version and ordered the .1
Are you happy with your plumbing or would you do anything different? After two tries, I think you might be an expert on the subject now!

With the new motor I went to silicone tubing. No more aluminum. So much easier! I mentioned this in a later video (don't remember which one) and pictured it in my "TOP 20" video, released this past week: https://www.youtube.com/watch?v=wydbdoZYLk0&t=38s
Things seem to be perking along nicely now although I'm going to get my tune tweaked since it was done before the headers. When all is done I'll get a dyno run done and see if all this silliness adds up to real figures! :dance:

[Newsguy]

I also have '99 and after removing this airbox from the '02 and seeing how small it is, I wonder if there is any advantage to the 2.5. Do you know of anyone doing this and finding a benefit? I realize the bigger throttle body is probably too much. Didn't get any results searching.