Urethane Transaxle Mounts - Good?

[Silber]

Anyone have these?

https://www.uspmotorsports.com/Torque-Solution-Engine-Mount-Kit-Porsche-Boxster-Cayman.html?utm_source=google&utm_medium=cpc&adpos=1o7&scid=scplpTS-POR-009&sc_intid=TS-POR-009&gclid=CjwKCAjwtO7qBRBQEiwAl5WC27-5HkrxYWfuezTCMigBQqAv_b8-XLRn8aKCTZD8gE_EisjyLWWQAhoCmv8QAvD_BwE

If so, what do you think?

Silber

[maytag]

Originally Posted by Silber

Anyone have these?



https://www.uspmotorsports.com/Torque-Solution-Engine-Mount-Kit-Porsche-Boxster-Cayman.html?utm_source=google&utm_medium=cpc&adpos=1o7&scid=scplpTS-POR-009&sc_intid=TS-POR-009&gclid=CjwKCAjwtO7qBRBQEiwAl5WC27-5HkrxYWfuezTCMigBQqAv_b8-XLRn8aKCTZD8gE_EisjyLWWQAhoCmv8QAvD_BwE



If so, what do you think?



Silber

Those are interesting to me, as well. However they don't list any for the 986. Are the 987 units similar enough?

Sent from my SM-G970U using Tapatalk

[steved0x]

Originally Posted by maytag

Those are interesting to me, as well. However they don't list any for the 986. Are the 987 units similar enough?

Sent from my SM-G970U using Tapatalk

I think they are, I have the Wevo version on my Boxster and I plan to move them to my Cayman when I get a chance, according to the Tarett site (where I got them) they are compatible:

https://www.tarett.com/items/986-987-981-718-products/986-987-981-718-engine~trans~brakes~elect-/semi-solid-964-993-eng-mount-detail.htm

[Quadcammer]

i used 964 RS engine mounts as my tranny mount. they work good.

[maytag]

Originally Posted by Quadcammer

i used 964 RS engine mounts as my tranny mount. they work good.

Like these?
https://www.pelicanparts.com/More_Info/96437504381.htm?pn=964-375-043-81-M253&gclid=EAIaIQobChMIj4vD18KU5AIVcRh9Ch0c7whzEAQYAiAB EgKUF_D_BwE

[edc]

You can also remove the hydraulic fluid in the OE mount and fill with poly. For even more firmness fill with poly around the stud the other side too.

[maytag]

Originally Posted by edc

You can also remove the hydraulic fluid in the OE mount and fill with poly. For even more firmness fill with poly around the stud the other side too.

Glad this came up. Just did that tonight. I'll hope to install the motor tomorrow, then. ;-)

Sent from my SM-G970U using Tapatalk

[Quadcammer]

Originally Posted by maytag

Like these?
https://www.pelicanparts.com/More_Info/96437504381.htm?pn=964-375-043-81-M253&gclid=EAIaIQobChMIj4vD18KU5AIVcRh9Ch0c7whzEAQYAiAB EgKUF_D_BwE

Yes exactly that

[edc]

https://imgur.com/H5EOa1u

[Silber]

Originally Posted by Quadcammer

i used 964 RS engine mounts as my tranny mount. they work good.

I looked into these, they’re only $80-$100 a pair which is good, but you need $100+ worth of Porsche bolts to make them work, so they are about $200 for the set up. So, the urethane ones are only about $70 more, so I’m thinking those might be the way to go.

Silber

[Quadcammer]

Originally Posted by Silber

I looked into these, they’re only $80-$100 a pair which is good, but you need $100+ worth of Porsche bolts to make them work, so they are about $200 for the set up. So, the urethane ones are only about $70 more, so I’m thinking those might be the way to go.

Silber

no sir. You need roughly $15 worth of porsche washers and another $15 from www.boltdepot.com for the bolts.

porsche bolts are nothing special. If i was more than $115 into my tranny mounts, i'd be surprised.

[thstone]

I also have the Wevo units. They do transmit a higher level of vibration to the chassis than the stock mounts. I can see the vibrations in my side mirror.

[Starter986]

Originally Posted by Quadcammer

porsche bolts are nothing special.

Sir, they have the "P" on them. Clearly that is worth something.