Suspension Refresh -- help me spend my $$$

[Need_for_speed]

Originally Posted by flaps10

I'm just finishing up my suspension refresh. I got all four coffin arms for just under $400. I also did the front control arms and I did Fabspeed adjustable rear track arms (cheaper than stock). I also did inner and outer tie rod ends up front.

Can't put all this crap back together without also doing secondary cat delete and aftermarket exhaust, now can I?

I think you meant TopSpeed? I did see those and you're right, $200 for the pair is a considerable savings. Great suggestion! The only concern I have is fitment. The OE track arms are curved, for wheel fitment, I think. Did you have any issues?

[flaps10]

Originally Posted by Need_for_speed

I think you meant TopSpeed? I did see those and you're right, $200 for the pair is a considerable savings. Great suggestion! The only concern I have is fitment. The OE track arms are curved, for wheel fitment, I think. Did you have any issues?

Yeah I'm sure it was TopSpeed, sorry (I'm old and forgetful). They're actually beautifully made.

I found they do run close to the tire as you point out, so I'm throwing on some 12mm spacers. Here it is with no spacers:


Oh and I also did sway bar end links and bushings, a kit I picked up from an inmate here on 986 way back when I had my engine apart.