Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Performance and Technical Chat

Post Reply
 
LinkBack Thread Tools Display Modes
Old 09-12-2012, 04:48 PM   #1
Registered User
 
Join Date: Aug 2012
Location: Las Vegas
Posts: 78
Alarm Codes

Any input on these codes that are showing up in Durametric under the alarm panel:



SolidWorks Mike is offline   Reply With Quote
Old 09-14-2012, 07:31 AM   #2
SPB racer
 
Join Date: Feb 2011
Location: San Antonio TX
Posts: 252
Garage
According to my manual for a 97-99 which may or may not differ from other models:

Code 46 means that one door or the other is not activating when asked to lock. Manual says the possible causes are the supply lead, the door lock servo or the micro switch. I would have thought it would be self evident that your car is not locking. If it is locking properly then it probably needs a little fiddling so that the micro switch that registers the servo as having moved to the locked position is engaging properly. If it is locking properly you could also choose to ignore this code.

Code 34 means the interior monitor sensor (I am guessing they mean the infrared monitor in the middle of the dash) is faulty. Since it is not currently present I would ignore this one until it appears as a permanent issue - presuming you even care if it works.

Jittsl is offline   Reply With Quote
Post Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 07:07 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page