986 Forum - The Community for Porsche Boxster & Cayman Owners

986 Forum - The Community for Porsche Boxster & Cayman Owners (http://986forum.com/forums/index.php)

- Performance and Technical Chat (http://986forum.com/forums/forumdisplay.php?f=11)

- - Tap size for lug nut holes (http://986forum.com/forums/showthread.php?t=35431)

Mark_T

05-12-2012 05:05 PM

Tap size for lug nut holes

Can anyone tell me the size of the tap I need to clean out the lug nut holes?

san rensho

05-12-2012 05:13 PM

You can just buy any bolt that fits and cut 4 slots in it legnthwise with a dremel tool and use it as a tap. Use lots of oil or wd40, as cutting fluid and then clean out the threads.

BrokenLinkage

05-12-2012 06:27 PM

M14 x 1.5 is std for 986

Mark_T

05-12-2012 07:10 PM

Thank you!

brp987

05-12-2012 07:24 PM

Use a thread chaser to clean threads, not a tap. Using a tap may result in a loose fit.

Mark_T

05-12-2012 07:39 PM

Is that the same size as the spark plugs, by any chance?

All times are GMT -8. The time now is 06:44 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website