Side Intake Mesh ?

[Johnny Danger]

Originally Posted by ddb

I believe I like the split opening on the Turbo because the opening is taller. On your 986 I like the OE opening with the black mesh to pick up on those black wheels.

BTW, are your wheels flat (or semi-flat black) or do they have more gloss to them than appears in the pic?

I've often thought about having the spokes on my wheels painted black. Thus far I've been too lazy to do it.

They're gloss black .

[Allen K. Littlefield]

Dear Mr. Dan Gerous, I like the smooth transition into the nostrils (as opposed to the 'gills' on the newer Boxsters). It would seem that you would need a whole new rear quarter panel with this modification or is there another way to 'french' in the opening?

I am not personally fond of black painted wheels as it makes them hard to see and detail is lost, at least to these tired old eyes. Otherwise car looks great. Party ON!

AKL

[Johnny Danger]

Originally Posted by Allen K. Littlefield

Dear Mr. Dan Gerous, I like the smooth transition into the nostrils (as opposed to the 'gills' on the newer Boxsters). It would seem that you would need a whole new rear quarter panel with this modification or is there another way to 'french' in the opening?

I am not personally fond of black painted wheels as it makes them hard to see and detail is lost, at least to these tired old eyes. Otherwise car looks great. Party ON!

AKL

Same quarter panels, they plug right in .

[Overdrive]

The turbo look is nice, where can one get a set of those?

[Allen K. Littlefield]

Originally Posted by Johnny Danger

Same quarter panels, they plug right in .

I was referring to the white and yellow examples in the first couple of posts as I see no seam. The split turbo examples look like they would plug right in.

aKL

[Jager]

Here's another look...

[url]http://www.lltek.com/porschtek/Bxstr_986_kevlar_CF.htm[url]

[Johnny Danger]

Originally Posted by Allen K. Littlefield

I was referring to the white and yellow examples in the first couple of posts as I see no seam. The split turbo examples look like they would plug right in.

aKL

The yellow and white vehicles have had the oem inserts completely removed, and replaced with just mesh .

[Lobo1186]

Originally Posted by Johnny Danger

The yellow and white vehicles have had the oem inserts completely removed, and replaced with just mesh .

but on the stock piece is there that much lip? it seems that rear quarter in those pics is from a wide-body kit and designed with a deeper lip. I could be wrong though.

[The Radium King]

here's an image of a stock fender without the vent:

http://i84.photobucket.com/albums/k2/grizzly_011/DSC00831.jpg

so, there's obviously some bodywork going on with those white/yellow cars. more likely, those look like aftermarket widebody fenders.

[Johnny Danger]

Originally Posted by Lobo1186

but on the stock piece is there that much lip? it seems that rear quarter in those pics is from a wide-body kit and designed with a deeper lip. I could be wrong though.

Interesting point. So far as I know, the Gemballa kit retains all of the oem parts (except the hood), to include the fenders . I was under the impression, that if you remove the insert portion of the side intake, the remaining channel extends further inward than the photo RK has posted . In any case, it seems that the turbo style intakes win out .