PSE Switch retrofit

[CT986S]

Has anyone out there retrofitted the dash switch to a pre-04 986S? I have the switch, and the manuals (+TSBs) but I can't figure out how to do it.
If you know, or know someone that has done it, please spill. I don't need "wire a switch" response, what I need is what wires go to and from the switch in an 01S.
I understand my relay (series 02) has the capability to quiet the system via the gr/pk wire from the speedo, what I want to do is not have it speed dependant but be able to switch it at will.
TIA, my PSE is litereally only half installed as we speak ...
K
PS I don't ask much, do I?

[9eighty6]

Hey guys

I'm going to need this info as well ... I have tried searching for the info with no luck. Anyone have experience with this?

Thanks from me as well ...

[9eighty6]

Dug this up from another source but it is for the 996 ... anyone have any idea if it is the same? I just can't find the right document for the PSE for the 986.

Maybe a parts guy at the dealership could hook me up?