Ok i found the source of my slow power steering fluid leak, Attached is a picture of the joint where the leak is coming from. How do i fix this, is there an O-ring inside that i can replace? I already tried to tighten the joint but it was already tight and i can see that the space between the nut and the line that goes in moves alot and that whatever sealed it inside was gone or worn so there is play at the area specified in red in the picture.
Thanks tholyoak, Theres ALOT of play with that fitting, So much that the collar will touch the nut bolt and move away about 4 centimeters. I guess if you certain there are o-rings, Ill buy a set of o-rings and try to replace them myself.