3rd Party Keyless Entry DIY (Why Not?)

[particlewave]

At immobilizer:

BU/RD/BK door safe, pass. = BU/RD, driver side

BN/GN door contact, pass. = BR/GR/WH, driver side

BU/WH door locked, pass. = BU/WH/BN, driver side

All should show ground when the microswitch is closed. I'll confirm how they should operate when I get a chance, but probably not until tomorrow.

[particlewave]

Originally Posted by Swhitcomb

I truly appreciate all your help. Thank you for going out of your way to help me with what has been one of the biggest frustrations on my car.

Glad to help. My findings have been added to the quote below:

Originally Posted by particlewave

At immobilizer:

BU/RD/BK door safe, pass. = BU/RD, driver side Ground when door is closed

BN/GN door contact, pass. = BR/GR/WH, driver side Ground when door is open

BU/WH door locked, pass. = BU/WH/BN, driver side Ground when locked

All should show ground when the microswitch is closed. I'll confirm how they should operate when I get a chance, but probably not until tomorrow.

[Swhitcomb]

Thank you. I will check these as soon as I get the chance. While researching last weekend I did discover that the passenger side regulator is shot.

What's most curious to me about it not unlocking is that when you hit the unlock button, it does illuminate the interior lights. So it is getting the signal from the key, just not working properly. I have also noticed that if I unlock it manually it doesn't unlock the passenger side, and when I open the door it sets off the alarm.