3rd Party Keyless Entry DIY (Why Not?)

[healthservices]

As particlewave mentioned this system uses a neg ground for the signal. as you can see there are a couple of ways to configure the system...


This is the way I wired this product.

[healthservices]

So what was basically this ....




I cut the excess wires and this is what is left over to connect...



Notice I left the trunk wire in case I want to wire the trunk release at a later date.

Please note that these wires were for a 98 and your model year wire colors will vary

[particlewave]

It's 4am and I was bored, so I moved the receiver next to the immobilizer, same as yours. I decided that I wanted the turn signal flash and the trunk opener, so went ahead and moved it.
The signal flash is definitely nice!

If only I could fix this darn insomnia...