Footwell Subwoofer Enclosure DIY

[Benjamin]

Originally Posted by Dlirium

Off the chart! When you said you would post plans, i was thinking some measurements on the back of a napkin :-)

One question - the face doesn't seem to have any measurements listed. Not being familiar with "registration lines", are these a standard distance? I could probably guess, but thought I'd ask...

Thanks again for this great work!!

Thanks. I work on CAD a little bit for work and it's just easier for me to draw out plans using a mouse instead of a pencil. It's a lot easier to figure out angles and distances that way and you can easily rescale everything.

The registration marks are not a standard distance apart, they are just there so that when you print out all 6 panels, you have several lines to use to line up adjacent pages. If you hold those pages up to the light, several lines should overlap perfectly. It's just a way to know that each page isn't twisted, or too close/far from the next one. The lines from each page don't abruptly end, they run long and overlap the same lines on the adjacent page.

(I just read the above paragraph to my girlfriend and she looks puzzled).