Quote:
Originally Posted by Wilson01S
Duh. My fault. I don't have my cord yet- I was just curious to see if this unit had the ability to do it before I ordered one. I guess I will order one and find out!
|
"cord" is not needed in order to program the aux mode on the CDR220.
Here is a
pdf document with instructions for the CDR220 and others:
Turn radio "ON"
2. Press and hold the "TP" button for about 8 seconds until Becker 1 is
displayed.
3. Turn the Tuning Knob until AUX OFF is displayed.
4. Press either button located directly under the Arrows on the display to
change the present setting from OFF to ON.
5. Turn radio OFF.
6. Turn Radio back “ON” Press “CD” button to enter AUX Mode.
If you are not able to do this now or anytime in the future, simply disconnect the radio power plug or battery for a little while, reconnect and try again.
http://www.discountcarstereo.com/pdf/ip-bkr.pdf
Threaded Mode
