switching out stereo

[wvboxst3r]

ok have decided to go aftermarket. Went to local chain and was told that a kenwood single din was not a plug and play. Was told that the amp would not connect and then would have to rewire to new amp. I have not read this any where. please help do not want to be taken but dont want to mess anything up.

[Burg Boxster]

could be accurate... but need to know your MY?

[wvboxst3r]

2000 base with amp and two door subs

[Burg Boxster]

No, you will have to get an adapter or rewire at the h/u but Boxsters pre '03 all use copper wiring from h/u to amp. Since then, they all use fiberoptic to connect all the authorized components which unless you found a MOST (fiberoptic) compatible h/u would require complete rewiring.

Good luck

[wvboxst3r]

after more research looks like an adaptor and a h/u with multiple pre outputs will work. This will also leave the extra speaker wires to add rear, with only running a couple of wires.