Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > DIY Project Guides

Post Reply
 
LinkBack Thread Tools Display Modes
Old 10-20-2011, 07:32 PM   #1
Registered User
 
jsceash's Avatar
 
Join Date: Aug 2009
Posts: 1,466
Garage
New AOS

I installed the Motorsport AOS this evening Not terribly hard or time consuming I was completed in 2 hours including, R&R motor cover, R&R belt cover, and replace unit. It is much bigger and I hope it work as well as people have said.
__________________
2003 Black 986. modified for Advanced level HPDE and open track days.
* 3.6L LN block, 06 heads, Carrillo H rods, IDP with 987 intake, Oil mods, LN IMS. * Spec II Clutch, 3.2L S Spec P-P FW. * D2 shocks, GT3 arms & and links, Spacers front and rear * Weight reduced, No carpet, AC deleted, Remote PS pump, PS pump deleted. Recaro Pole position seats, Brey crouse ext. 5 point harness, NHP sport exhaust
jsceash is offline   Reply With Quote
Old 10-21-2011, 09:13 AM   #2
Registered User
 
jaykay's Avatar
 
Join Date: Sep 2009
Location: toronto
Posts: 2,668
How much did this equipment cost you and where did you get it?
__________________
986 00S
jaykay is offline   Reply With Quote
Old 10-21-2011, 09:45 AM   #3
Registered User
 
Join Date: May 2008
Location: Toronto
Posts: 2,656
Do you have deep sump spacer and X51 oil pan as well?
ekam is offline   Reply With Quote
Old 10-21-2011, 12:07 PM   #4
Registered User
 
jsceash's Avatar
 
Join Date: Aug 2009
Posts: 1,466
Garage
The parts were purchased through My local Porsche dealership. They have been giving me a discount so the tube from 4-6, 2 longer Socket HD Screws and the new AOS cost me $665 and change. If can figure out how to post pictures I have them. The sump extension from LN is on my tool Box. If time permits, this will be Sundays Project.
__________________
2003 Black 986. modified for Advanced level HPDE and open track days.
* 3.6L LN block, 06 heads, Carrillo H rods, IDP with 987 intake, Oil mods, LN IMS. * Spec II Clutch, 3.2L S Spec P-P FW. * D2 shocks, GT3 arms & and links, Spacers front and rear * Weight reduced, No carpet, AC deleted, Remote PS pump, PS pump deleted. Recaro Pole position seats, Brey crouse ext. 5 point harness, NHP sport exhaust
jsceash is offline   Reply With Quote
Old 10-21-2011, 06:53 PM   #5
Registered User
 
jsceash's Avatar
 
Join Date: Aug 2009
Posts: 1,466
Garage
Parts Needed

Difference in stock and Motorsport AOS

This the original AOS

Motorsport AOS Installed
__________________
2003 Black 986. modified for Advanced level HPDE and open track days.
* 3.6L LN block, 06 heads, Carrillo H rods, IDP with 987 intake, Oil mods, LN IMS. * Spec II Clutch, 3.2L S Spec P-P FW. * D2 shocks, GT3 arms & and links, Spacers front and rear * Weight reduced, No carpet, AC deleted, Remote PS pump, PS pump deleted. Recaro Pole position seats, Brey crouse ext. 5 point harness, NHP sport exhaust
jsceash is offline   Reply With Quote
Old 10-21-2011, 07:24 PM   #6
Registered User
 
jsceash's Avatar
 
Join Date: Aug 2009
Posts: 1,466
Garage

Part numbers off tags

The old AOS

Actual new parts Breather tub 4-6 to AOS 2 6X25 socket hed screws and Motorsport AOS

Size difference between stock and Motorsport AOS


New one Installed
__________________
2003 Black 986. modified for Advanced level HPDE and open track days.
* 3.6L LN block, 06 heads, Carrillo H rods, IDP with 987 intake, Oil mods, LN IMS. * Spec II Clutch, 3.2L S Spec P-P FW. * D2 shocks, GT3 arms & and links, Spacers front and rear * Weight reduced, No carpet, AC deleted, Remote PS pump, PS pump deleted. Recaro Pole position seats, Brey crouse ext. 5 point harness, NHP sport exhaust

Last edited by jsceash; 10-21-2011 at 07:30 PM.
jsceash is offline   Reply With Quote
Old 11-06-2011, 03:22 PM   #7
Registered User
 
Brinkley's Avatar
 
Join Date: Nov 2011
Location: Tampa
Posts: 46
Thank you for the detailed parts list, item numbers.

My question is: I have a '05 996 3.6L in my Boxster, will these parts be the same for that motor as well as your 2.7L?

Any insight would be great as I'd like to do this over the Christmas Holiday.
Brinkley is offline   Reply With Quote
Old 11-29-2011, 10:23 AM   #8
Registered User
 
Join Date: Sep 2004
Location: Atlanta
Posts: 1,820
brink - since yours is a race car, why not go with a catch can setup? plug off the throttle body & route the AOS outlet to a catch can instead.
__________________
insite
'99 Boxster
3.4L Conversion

http://i156.photobucket.com/albums/t...1/KMTGPR-1.jpg
insite is offline   Reply With Quote
Old 11-29-2011, 10:45 AM   #9
Registered User
 
97 Boxster's Avatar
 
Join Date: Feb 2010
Location: Phoenix, Arizona Baby
Posts: 495
Where is the best place to get that hose clamp tool? Thanks
__________________
2006 Hummer H3 - RED 76k mi - LIFTED - 3rd row custom seating on 35's and a manual tranny.
1997 Boxster Guards - RED 86k mi - 19" Lobster Claw Wheels on Conti's , Porsche side decal for extra "speed", manual tranny -signed by Hurley Haywood
Phoenix, Arizona
97 Boxster is offline   Reply With Quote
Old 04-28-2012, 09:56 AM   #10
Registered User
 
Join Date: Aug 2010
Location: Florida
Posts: 156
Just replaced the AOS several weeks ago on a 2002 S. Clamp removal tool also available at Sears. Not very expensive and well worth it in time savings and skinned knuckles (large hands). I did however replace the clamp with the worm gear type.
opus69 is offline   Reply With Quote
Old 11-29-2011, 11:01 AM   #11
Registered User
 
Join Date: Sep 2004
Location: Atlanta
Posts: 1,820
you can buy them at pep boys.
__________________
insite
'99 Boxster
3.4L Conversion

http://i156.photobucket.com/albums/t...1/KMTGPR-1.jpg
insite is offline   Reply With Quote
Old 11-29-2011, 05:46 PM   #12
Registered User
 
jsceash's Avatar
 
Join Date: Aug 2009
Posts: 1,466
Garage
Quote:
Originally Posted by insite View Post
you can buy them at pep boys.
After uncliping the 2 breather hoses and unbolting the AOS I just pulled up on the OLD AOS it did not take a tool. I replaced it with a worm clamp and a 5/16" nut driver. from the right wheel well.
__________________
2003 Black 986. modified for Advanced level HPDE and open track days.
* 3.6L LN block, 06 heads, Carrillo H rods, IDP with 987 intake, Oil mods, LN IMS. * Spec II Clutch, 3.2L S Spec P-P FW. * D2 shocks, GT3 arms & and links, Spacers front and rear * Weight reduced, No carpet, AC deleted, Remote PS pump, PS pump deleted. Recaro Pole position seats, Brey crouse ext. 5 point harness, NHP sport exhaust
jsceash is offline   Reply With Quote
Old 04-28-2012, 06:46 PM   #13
Registered User
 
bar10dah's Avatar
 
Join Date: Aug 2011
Location: Neither here, nor there...
Posts: 458
Cable Operated Hose Clamp Pliers- Craftsman-Tools-Auto & Mechanics Tools-Auto Specialty Tools

Very nice tool. I've used it several times, on the AOS, oil filler tubes, SAI hose, etc...

And since I now have this tool, I just replaced the OEM clamps with OEM clamps. I find it easier to remove/install the OEM clamps with this tool, vs. a a worm gear one with a socket/ratchet. Just personal preference.
bar10dah is offline   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 08:42 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page