ABS pump wiring harness
Anyone have (or know the part # )for a NON - PSM ABS pump Wire harness .
I am removing the psm abs pump & replacing w NON psm abs pump & need the appropriate wire harness. My car is 01 Boxster S 6 -speed manual 3.2 - came w PSM Replacing the PSM ABS pump w NON PSM ABS PUMP- Bosch ABS Brake Pump Part# 996.355.955.06 removed from a 2003 Porsche Boxster 986 Convertible 5 Speed RWD(rear wheel drive) 2.7 VIN# WPOCA29843U621544 Thanks for any help w appropriate wire harness |
Quote:
You are probably also going to encounter CEL/MIL fault codes as the DME is going to be looking for communications from the PSM system and won't see it when you change the harness. |
The factory harness for a non PSM 2001 car should be 996-612-951-00, around $120, but I would check that number with a dealer to be sure.
|
Quote:
A quick search of the part # u gave came up with one for $ 66 THANKS! Porsche Parts - Porsche OEM Parts - Genuine Factory Parts Accessories - Wholesale |
Quote:
|
Quote:
Any differences 2001 2.7 vs 3.2 abs pump? Thanks for good info. |
Can't you go back to where you bought the pump from and ask for the harness ?
I presume it came from a car being parted out |
Quote:
|
I can look for a prt number on the harness of my 03 and take you some pictures if that helps any ?
|
Quote:
|
I'll get on with it strait after work today
|
Factory wiring scematics
Still working on this
As JFP said the wiring harnesses are car specific My question is - if I supply the two Vin #s , does anyone here have the ability to supply me the two Porsche factorty wiring schematics for the abs pump wiring harnesses. -one for my current car with PSM vs one from the non PSM abs pump I have to install ) Does that make sense ? |
Sorry , I forgot all about this !!!
What do you need ? |
Quote:
I have both vin # s |
If all you need are wiring/flow diagrams , I've come across this before rebuilding a fire damaged 964 many years ago .
The vin was needed to order the right loom from porsche as that showed all the options fitted to that car , but in reality , the schematics where a "cover all bases" affair . It will be worth getting a copy from Bentley to take a look ,nasty I'd wager its the same schematic for all variables . Another "promise" , but I have a Bentley here and tommorrow I will take a look !!! (Busy smoking and drinking corona by the pool at the moment) :D |
Quote:
|
Quote:
Thanks |
Quote:
Thanks |
I'm still at work .
Will get onto it as soon as I get home |
Email sent .
Let me know if you need any other pages |
Update?
I know on the 987/997's I just "unprogram" the PSM module. I see nothing in the 986 programming that says I cant do it the same way. Even if you switch the harness and go from a 4 port to a 3 port ABS pump, you will still have to change the programming. |
update?
i want to do the same thing on my 04 boxster S that abs/psm is driving me crazy |
Quote:
Piper |
All times are GMT -8. The time now is 09:51 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website