![]() |
Quote:
|
Quote:
|
Quote:
|
Ok, I finally got the updated shifter installed and ran it at Buttonwillow Raceway last weekend (two days of practice).
It. Was. Awesome. The combination of the Ben's short shifter, Function First bearings, and my rally shift knob was perfect! There is no slop in the shifting mechanism and the tall rally shift knob brings the shifter closer to the steering wheel within quick and natural reach. The shifts were effortless and I never had to think about a shift while out of the track. http://986forum.com/forums/uploads02...1540589855.jpg |
I had a blast of a Saturday racing at Buttonwillow with the PCA! (but I'm home a day early)
For the record, I qualified 6th of 14, worked my way up to 3rd, but did not finish (DNF) due to to a spin off track which knocked the alignment off and ended the weekend. And per normal procedure at Buttonwillow, I had what seemed like 25 lbs of California Central Valley dirt both outside and inside the car! The dust there is super fine and when someone goes off course, it creates huge opaque dust clouds. Overall, I am pleased with my progress and was definitely faster at this track than I ever have been. There were moments of brilliance but unfortunately they were often followed by mistakes. Now, I just need to work on consistency, consistency, consistency. Video coming... http://986forum.com/forums/uploads02/Pic11541981880.jpg http://986forum.com/forums/uploads02/Pic21541981896.jpg |
Quote:
Green with envy. Love that track.... but never been on 4 wheels. ;-) Sent from my SM-G930T using Tapatalk |
Good seeing you out there Tom! I did notice the car in the garage Saturday with a generous dusting of BW soil. Lots of cars got dirty this weekend but thankfully mine was not one of them.
My weekend went very well. I worked with a student in a 997 and he did great, getting signed-off to solo on Sunday. The weather, car, and tires cooperated and I managed a personal best in the final TT Sunday to seal a 2018 PCA CC07 Championship. A nice finish to a goofy season for me. Now to prep for Laguna Seca in 2 weeks... |
Quote:
|
Great catching up with you as well. Sorry you had to miss Sunday.
Congrats to Topless too :cheers:. Guess I have to suffer with 2nd place;) There is always next year :D |
Quote:
My elbow already crashes into the arm rest / console with the 997 Porsche SSK. I would like an increase in control resolution that going to a standard 997 offers but I fear that this will put travel way too far back in the gate (6-speed) My home made knob is mounted quite low out necessity ( just to mount it)so shift effort is very high........2 to 3 can be very difficult especially on track when everything heats up. I am planning on trying a Cayman engine cover to take pressure of the shifter cables and chaining the transmission mounts....all in an effort to smooth out shifting. |
Quote:
|
Here is some video from last Saturday, including my spin.
The start was solid and I was able to make a nice pass to move up a spot on the first lap. There was some back and forth with other cars, but later in the race, I got too deep into a turn and ended up out in the marbles, then lost the rear end and went into the dirt. The dust cloud was spectacular! As always, full screen, 1080p, and audio improves the experience. <iframe width="560" height="315" src="https://www.youtube.com/embed/o-_UdI5196U" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe> |
I am glad to announce that the #254 House Automotive Spec Boxster is featured in the SSF Auto Parts 2019 calendar!
SSF provides parts on a daily basis to independent shops that repair European vehicles. My friends have already started calling me "Mr. February" :eek: :D:D:D http://986forum.com/forums/uploads02...1543626361.jpg |
Tire Pressure Testing
Last Friday, I spent the morning at Willow Springs (prior to the race weekend) doing tire pressure testing. Why? I've been running various tire pressures based on my own experiences and hearing recommendations from others. However, like a lot of drivers, I felt that I wasn't really maximizing or optimizing this important variable - it was all a bit of hit and miss for me. What did I do? I ran the following test plan: (1) 10 laps to warm up the car, the tires, and my driving. The goal was to run consistent 1:34 - 1:35 lap times to set a baseline. This isn't a super fast lap time for a Spec Boxster at this track (the record is 1:31) but it is fast enough to get the tires up to temp and to evaluate the handling and feel. (2) Pit and quickly set the tires to 35 psi hot. Then immediately go back out and run 5-7 laps with as low of a lap time that I could muster while making note of the grip level, handling characteristics, and min lap time. (3) Pit and quickly set the tires to 32.5 psi hot. Then immediately go back out and run 5-7 laps with as low of a lap time that I could muster while making note of the grip level, handling characteristics, and min lap time. (4) Pit and quickly set the tires to 30 psi hot. Then immediately go back out and run 5-7 laps with as low of a lap time that I could muster while making note of the grip level, handling characteristics, and min lap time. The total test time was about 50 mins and 28 laps. The goal was to keep the track and weather conditions as constant as possible. Of course, the biggest variable was the driver but I did my best to run consistent laps from group to group. What did I learn? My fastest lap time came in the second, 32.5 psi group, however I felt that the car had more grip in the 30 psi session but I didn't take full advantage of it. Based on these results and some other qualitative inputs like how I like the car to feel, I settled on a tire pressure setting for the upcoming weekend of racing that was highly successful in terms of providing strong grip and consistent handling characteristics throughout the three races. The exact tire pressure that I selected is somewhat irrelevant since it is highly dependent on the setup of my car and my particular driving style - the key point to share is that if you haven't done any testing like this, you might want to consider it to help you dial in a more optimal tire pressure. As usual, it was a weekend of very tight racing (so tight that I had a bit of incidental contact!). Race videos are coming soon! |
That was a great test session - good info
Did you take any tire temps before adjusting? |
Quote:
|
This week I received a very nice (and heavy) gift in the form of a GT2RS paperweight for my home office from the folks at Porsche! It's always nice to be appreciated.
http://986forum.com/forums/uploads02...1544655910.jpg http://986forum.com/forums/uploads02...1544655925.jpg http://986forum.com/forums/uploads02...1544655939.jpg |
Here is video from the three practice starts at the PCA Buttonwillow race last month. Starts are always a ton of fun and excitement! Lots of close side by side racing. I could do these all day. :)
<iframe width="560" height="315" src="https://www.youtube.com/embed/ySQpQGHOjQI" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe> |
Another gift from Porsche arrived today!
Looks like I'll be at the LA Porsche Driving Experience Center to drive some new cars on their short track in January. Four hours in a GT-3 RS sounds like a lot of fun... Porsche Experience Center Los Angeles http://986forum.com/forums/uploads02...1545355836.jpg |
Very nice, that should be fun :cheers:
|
All times are GMT -8. The time now is 06:00 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website