Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Post Reply
 
LinkBack Thread Tools Display Modes
Old 01-08-2007, 07:53 AM   #1
07 Carrera S Cab
 
Boxtaboy's Avatar
 
Join Date: Nov 2005
Location: New Jersey
Posts: 2,273
Garage
Interesting. Stock set up on the 17s is 205/50 fronts with 255/40 rears. On the fronts, I was considering going from to the 225/45 size, as many folks have done this to reduce understeer, and keeping the rear tire sizing the same. Sounds like there isn't much benefit from doing this though.
__________________
Current: 07 Carrera S Cab in Midnight Blue

Previous: 01 Boxster in Arctic Silver, 86 944 in Guards Red
Boxtaboy is offline   Reply With Quote
Old 01-08-2007, 08:22 AM   #2
Registered User
 
Join Date: Apr 2006
Location: Chicago
Posts: 585
I'd say go for spacers if all you're trying to do is move the wheels out a little.
Sammy is offline   Reply With Quote
Old 01-08-2007, 12:45 PM   #3
Registered User
 
Join Date: Nov 2006
Location: Virginia
Posts: 846
Quote:
Originally Posted by Sammy
I'd say go for spacers if all you're trying to do is move the wheels out a little.
Agree. If its only for cosmetics, I would look for either adaptors or spacers to "push the wheels" out in the fenders. If you are looking to enhance performance, then a jump to wider rims and tires would do much better than simply "larger tires". This can get $$$$ when new/replacement wheels are the direction you choose.

The widest tires for the stock 7 and 8.5" rims are likely 225/275. But a 225/255 would provide a better "balanced" feel.
__________________
1976 914 2.0
2000 Boxster 2.7 (sold)
1978 911 SC (sold)
1970 914 w/2056 (sold)
racer_d is offline   Reply With Quote
Old 01-09-2007, 12:40 AM   #4
Registered User
 
Join Date: Feb 2005
Location: Canada
Posts: 183
Thanks for the tire advice guys.

Any thoughts on the thickness of spacers permitted? Front? Rear?
socratic is offline   Reply With Quote
Old 01-09-2007, 01:03 AM   #5
Registered User
 
Join Date: Nov 2006
Location: pdx
Posts: 8
The anniversary model used a 5mm spacer I believe. Which is subtle but does give you a lil' something.

Combine that with a slight bump in tire width where it needs it. I'd go for the 225 45 up front, stick with the 255 out back. And maybe fit some of the shorter ROW springs to lower your stance and you should get that more aggressive look you want without too much compromise.

And then of course you should driver faster. That's the best way to get that more aggressive look, with more aggressive action.

jh
huzzah ! is offline   Reply With Quote
Old 01-09-2007, 03:22 AM   #6
lwc
Registered User
 
Join Date: Feb 2005
Location: OK
Posts: 23
I've used 7mm front and 14mm rear for a couple of years now and have been very happy with the results.



Be advised that my manual states that using 17mm on the rear axle will not allow the spare tire to fit without first removing the spacer . . .
lwc is offline   Reply With Quote
Old 01-09-2007, 09:41 AM   #7
Registered User
 
Join Date: Feb 2005
Location: Canada
Posts: 183
Quote:
Originally Posted by lwc
I've used 7mm front and 14mm rear for a couple of years now and have been very happy with the results.



Be advised that my manual states that using 17mm on the rear axle will not allow the spare tire to fit without first removing the spacer . . .
Thanks lwc.

What brand were your spacers and how much did it cost?
socratic is offline   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 12:18 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page