Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Post Reply
 
LinkBack Thread Tools Display Modes
Old 01-05-2007, 06:23 AM   #1
Registered User
 
Join Date: Sep 2005
Location: Minneapolis/St. Paul, Minnesota, USA
Posts: 3,308
Hi,

Well, I would vacuum the area under the seat, probably remove the seat to insure getting all the water up. My car is never in the rain, but if it were exposed to the elements, and considering how expensive the Control Module is and how easily it can fry, as a protective measure I'd probably remove it from the floor and set it in one of those Rubbermaid containers and screw it back down. That way, you need to get better than an inch of water in the car before it could rise over the sides of the container and attack the Control Module. I wouldn't put a top on the container to avoid trapping moisture which could cause the same problem. Since it's under the seat, it would be all but invisible, but offer good protection. Hope this helps...

Happy Motoring!... Jim'99
MNBoxster is offline   Reply With Quote
Old 01-05-2007, 06:49 AM   #2
Registered User
 
Join Date: Oct 2005
Location: New Jersey
Posts: 983
Quote:
Originally Posted by MNBoxster
Hi,

Well, I would vacuum the area under the seat, probably remove the seat to insure getting all the water up. My car is never in the rain, but if it were exposed to the elements, and considering how expensive the Control Module is and how easily it can fry, as a protective measure I'd probably remove it from the floor and set it in one of those Rubbermaid containers and screw it back down. That way, you need to get better than an inch of water in the car before it could rise over the sides of the container and attack the Control Module. I wouldn't put a top on the container to avoid trapping moisture which could cause the same problem. Since it's under the seat, it would be all but invisible, but offer good protection. Hope this helps...

Happy Motoring!... Jim'99
Interesting - very creative Jim.
__________________
Happy Motoring!... Tim’05

http://i153.photobucket.com/albums/s..._kill/Siga.jpg
Dr. Kill is offline   Reply With Quote
Old 01-05-2007, 07:10 AM   #3
Registered User
 
Join Date: Dec 2006
Location: The Land of Far Far Away
Posts: 16
Great idea, MNBoxster! Paint the container black and use a rubber grommet for each of the screws. Water tight and invisible.

Good luck,

JPOG
jpog is offline   Reply With Quote
Old 01-05-2007, 10:27 AM   #4
Registered User
 
Join Date: Sep 2006
Location: chicago
Posts: 3,510
Send a message via AIM to djomlas
i had water there as well, couldnt figure out how it got there, then i looked on the other side, and what do you know one screw that was holding a plastic piece under the car was missing, so i just put one one and now no more water in there
__________________
http://i34.tinypic.com/157yslk.jpg
"I couldn't find the sports car of my dreams, so I built it myself." ~F. Porsche
Gemballa springs::litronics::Eurotech 18s(275/225)::B&M::MOMO wheel::
exhaust cutouts::EVOcoldair intake::OEM smoked tails & sidemarkers::

colormatched bumperettes::Top Speed Pro-1 exhaust::
my cardomain/pictures page
djomlas is offline   Reply With Quote
Old 01-05-2007, 11:38 AM   #5
Registered User
 
Join Date: Sep 2006
Location: new jersey
Posts: 404
does anyone have actual picture of these drains?
clb0099 is offline   Reply With Quote
Old 01-05-2007, 12:06 PM   #6
Registered User
 
Join Date: Sep 2006
Location: chicago
Posts: 3,510
Send a message via AIM to djomlas
here you go:

__________________
http://i34.tinypic.com/157yslk.jpg
"I couldn't find the sports car of my dreams, so I built it myself." ~F. Porsche
Gemballa springs::litronics::Eurotech 18s(275/225)::B&M::MOMO wheel::
exhaust cutouts::EVOcoldair intake::OEM smoked tails & sidemarkers::

colormatched bumperettes::Top Speed Pro-1 exhaust::
my cardomain/pictures page
djomlas is offline   Reply With Quote
Old 01-05-2007, 12:18 PM   #7
Registered User
 
Join Date: Sep 2006
Location: new jersey
Posts: 404
what are they using as a tool a screwdriver? There is that many drains? Also i am assuming i need to put the top up in the service mode to clean ome of the drains.
clb0099 is offline   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 01:38 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page