Replacing circuit board in key

[mhope43]

My concern is being able to see what im doing!
I ordered the vuttons and a new top piece for the remote QUOTE=maxbottomtime;668037]Do you know how to solder electronics? It's really not too fine for the button. pretty simple.


I had a button off, soldered a new one on. Unfortunately my car lost the key, so i had to replace the fob.

A new remote pcb + programming will be $300 give or take, so take a swing at soldering first.[/QUOTE]

[BruceH]

Originally Posted by mhope43

My concern is being able to see what im doing!

My concern as well but I figure it is worth a try for the low cost of the kit.

[maxbottomtime]

Originally Posted by mhope43

My concern is being able to see what im doing!
I ordered the vuttons and a new top piece for the remote QUOTE=maxbottomtime;668037]Do you know how to solder electronics? It's really not too fine for the button. pretty simple.


I had a button off, soldered a new one on. Unfortunately my car lost the key, so i had to replace the fob.

A new remote pcb + programming will be $300 give or take, so take a swing at soldering first.

[/QUOTE]

I can't speak to your vision, but it's fairly large for electronics. You can use an illuminated magnifying glass if that would help.

[mhope43]

Went better than I thought! solder on new microswitch, replaced the top key cover piece and it all works, joy to have remote again!

[BruceH]

Originally Posted by mhope43

Went better than I thought! solder on new microswitch, replaced the top key cover piece and it all works, joy to have remote again!

Great to hear